lkml.org 
[lkml]   [2014]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/2] ARM: at91: remove phy fixup for sama5d3xek boards
Hello Bo,

I know you're quite busy, but if you have some time could you test this
series on both CPU Modules (Embest and Ronetix): I only own the Embest
one.

Best Regards,

Boris

On Thu, 26 Jun 2014 12:13:33 +0200
Boris BREZILLON <boris.brezillon@free-electrons.com> wrote:

> Hello,
>
> This patch removes a board specific hook for sama5d3xek boards from the
> sama5d3 generic DT board file.
>
> This hook (which register a phy fixup configuring board specific delays
> in the ksz9021 ethernet phy) is now replaced by the appropriate DT
> properties definitions in the sama5d3xcm.dtsi file.
>
> Best Regards,
>
> Boris
>
> Changes since v1:
> - fix txc-skew-ps and rxc-skew-ps delays
> - remove phy address info to handle Ronetix and Embest HW designs
>
> Boris BREZILLON (2):
> ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek
> boards
> ARM: at91: remove phy fixup for sama5d3xek boards
>
> arch/arm/boot/dts/sama5d3xcm.dtsi | 15 +++++++++++++++
> arch/arm/mach-at91/board-dt-sama5.c | 22 ----------------------
> 2 files changed, 15 insertions(+), 22 deletions(-)
>



--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2014-07-09 19:01    [W:0.135 / U:7.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site