lkml.org 
[lkml]   [2014]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] serial: core: Preserve termios c_cflag for console resume
Date
When a tty is opened for the serial console, the termios c_cflag
settings are inherited from the console line settings.
However, if the tty is subsequently closed, the termios settings
are lost. This results in a garbled console if the console is later
suspended and resumed.

Preserve the termios c_cflag for the serial console when the tty
is shutdown; this reflects the most recent line settings.

Fixes: Bugzilla #69751, 'serial console does not wake from S3'
Reported-by: Valerio Vanni <valerio.vanni@inwind.it>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/serial/serial_core.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index b68550d..aab7190 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -239,6 +239,9 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
/*
* Turn off DTR and RTS early.
*/
+ if (uart_console(uport) && tty)
+ uport->cons->cflag = tty->termios.c_cflag;
+
if (!tty || (tty->termios.c_cflag & HUPCL))
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);

--
2.0.0


\
 
 \ /
  Last update: 2014-07-09 16:01    [W:0.046 / U:1.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site