lkml.org 
[lkml]   [2014]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 5/5] ARM: DT: STi: STiH416: Add DT node for MiPHY365x
Date
The MiPHY365x is a Generic PHY which can serve various SATA or PCIe
devices. It has 2 ports which it can use for either; both SATA, both
PCIe or one of each in any configuration.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/boot/dts/stih416-b2020-revE.dts | 10 ++++++++++
arch/arm/boot/dts/stih416-b2020.dts | 12 ++++++++++++
arch/arm/boot/dts/stih416.dtsi | 22 ++++++++++++++++++++++
3 files changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
index ba0fa2c..80aff0f 100644
--- a/arch/arm/boot/dts/stih416-b2020-revE.dts
+++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
@@ -31,5 +31,15 @@
ethernet1: dwmac@fef08000 {
snps,reset-gpio = <&PIO0 7>;
};
+
+ miphy365x_phy: miphy365x@fe382000 {
+ phy_port0: port@fe382000 {
+ st,sata-gen = <3>;
+ };
+
+ phy_port1: port@fe38a000 {
+ st,pcie-tx-pol-inv;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts
index 4e2df66..c3c2ac6 100644
--- a/arch/arm/boot/dts/stih416-b2020.dts
+++ b/arch/arm/boot/dts/stih416-b2020.dts
@@ -12,4 +12,16 @@
/ {
model = "STiH416 B2020";
compatible = "st,stih416-b2020", "st,stih416";
+
+ soc {
+ miphy365x_phy: miphy365x@fe382000 {
+ phy_port0: port@fe382000 {
+ st,sata-gen = <3>;
+ };
+
+ phy_port1: port@fe38a000 {
+ st,pcie-tx-pol-inv;
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 06473c5..e62fdd3 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -9,6 +9,8 @@
#include "stih41x.dtsi"
#include "stih416-clock.dtsi"
#include "stih416-pinctrl.dtsi"
+
+#include <dt-bindings/phy/phy-miphy365x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/stih416-resets.h>
/ {
@@ -236,5 +238,25 @@
resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
<&softreset STIH416_KEYSCAN_SOFTRESET>;
};
+
+ miphy365x_phy: miphy365x@fe382000 {
+ compatible = "st,miphy365x-phy";
+ st,syscfg = <&syscfg_rear>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ phy_port0: port@fe382000 {
+ #phy-cells = <1>;
+ reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
+ reg-names = "sata", "pcie", "syscfg";
+ };
+
+ phy_port1: port@fe38a000 {
+ #phy-cells = <1>;
+ reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;
+ reg-names = "sata", "pcie", "syscfg";
+ };
+ };
};
};
--
1.8.3.2


\
 
 \ /
  Last update: 2014-07-09 15:41    [W:0.214 / U:10.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site