lkml.org 
[lkml]   [2014]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 2/2] phy: qcom: Update APQ8064 PHY device tree bindings
    Date
    Update binding spec for Qualcomm SoC PHYs with APQ8064 compatibles.

    Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    ---
    Documentation/devicetree/bindings/phy/qcom-phy.txt | 3 ++-
    1 file changed, 2 insertions(+), 1 deletion(-)

    diff --git a/Documentation/devicetree/bindings/phy/qcom-phy.txt b/Documentation/devicetree/bindings/phy/qcom-phy.txt
    index 76bfbd0..6bff1e0 100644
    --- a/Documentation/devicetree/bindings/phy/qcom-phy.txt
    +++ b/Documentation/devicetree/bindings/phy/qcom-phy.txt
    @@ -1,4 +1,4 @@
    -Qualcomm IPQ806x SATA PHY Controller
    +Qualcomm IPQ806x/APQ8064 SATA PHY Controller
    ------------------------------------

    SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
    @@ -6,6 +6,7 @@ Each SATA PHY controller should have its own node.

    Required properties:
    - compatible: compatible list, contains "qcom,ipq806x-sata-phy"
    + or "qcom,apq8064-sata-phy".
    - reg: offset and length of the SATA PHY register set;
    - #phy-cells: must be zero
    - clocks: must be exactly one entry
    --
    1.9.1


    \
     
     \ /
      Last update: 2014-07-09 13:41    [W:3.776 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site