lkml.org 
[lkml]   [2014]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 4/7] xen/pciback: Implement PCI reset slot or bus with 'do_flr' SysFS attribute
On Tue, Jul 08, 2014 at 02:46:26PM -0400, Konrad Rzeszutek Wilk wrote:
> On Tue, Jul 08, 2014 at 07:02:51PM +0100, David Vrabel wrote:
> > On 08/07/14 19:58, konrad@kernel.org wrote:
> > > --- a/Documentation/ABI/testing/sysfs-driver-pciback
> > > +++ b/Documentation/ABI/testing/sysfs-driver-pciback
> > > @@ -82,3 +82,14 @@ Description:
> > > device is shared, enabled, or on a level interrupt line.
> > > Writing a string of DDDD:BB:DD.F will toggle the state.
> > > This is Domain:Bus:Device.Function where domain is optional.
> > > +
> > > +What: /sys/bus/pci/drivers/pciback/do_flr
> > > +Date: July 2014
> > > +KernelVersion: 3.16
> > > +Contact: xen-devel@lists.xenproject.org
> > > +Description:
> > > + An option to slot or bus reset an PCI device owned by
> > > + Xen PCI backend. Writing a string of DDDD:BB:DD.F will cause
> > > + the driver to perform an slot or bus reset if the device
> > > + supports. It also checks to make sure that all of the devices
> > > + under the bridge are owned by Xen PCI backend.
> >
> > Not sure I like this new interface. I solved this by adding a new reset
> > file that looked like the regular one the pci would have if it supported
> > FLR. I'm fairly sure I posted a series for this. Was there a reason
> > you didn't do this?
>
> It did not work.
>
> During bootup kobject would complain about a secondary 'reset' SysFS
> on the PCI device.

Here is what I saw:
20.441332] Key type dns_resolver registered
[ 20.446548] registered taskstats version 1
[ 20.452843] ------------[ cut here ]------------
[ 20.457731] WARNING: CPU: 0 PID: 1 at /home/konrad/ssd/konrad/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x6a/0x80()
[ 20.468594] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:01.0/0000:04:00.0/reset'
[ 20.481207] Modules linked in:
[ 20.484508] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.16.0-rc2-00027-g777b409 #1
[ 20.493701] Hardware name: /DQ67SW, BIOS SWQ6710H.86A.0066.2012.1105.1504 11/05/2012
[ 20.503561] 000000000000001f ffff8801192abcc8 ffffffff816e5bc2 000000000000001f
[ 20.511479] ffff8801192abd18 ffff8801192abd08 ffffffff810a0187 0000000000000000
[ 20.519396] ffff88010e8ff000 ffffffff819b632b ffff880118e421e8 ffff880118e410a8
[ 20.527337] Call Trace:
[ 20.530022] [<ffffffff816e5bc2>] dump_stack+0x51/0x6b
[ 20.535541] [<ffffffff810a0187>] warn_slowpath_common+0x87/0xb0
[ 20.541986] [<ffffffff810a0251>] warn_slowpath_fmt+0x41/0x50
[ 20.548155] [<ffffffff81245243>] ? kernfs_path+0x53/0x70
[ 20.553966] [<ffffffff812473fa>] sysfs_warn_dup+0x6a/0x80
[ 20.559855] [<ffffffff81246e56>] sysfs_add_file_mode_ns+0x126/0x160
[ 20.566668] [<ffffffff81246eb5>] sysfs_create_file_ns+0x25/0x30
[ 20.573110] [<ffffffff81476343>] device_create_file+0x43/0xb0
[ 20.579361] [<ffffffff81369d13>] pci_create_sysfs_dev_files+0x2c3/0x3e0
[ 20.586546] [<ffffffff81d1ffa5>] pci_sysfs_init+0x1f/0x51
[ 20.592429] [<ffffffff81d1ff86>] ? pci_driver_init+0x12/0x12
[ 20.598592] [<ffffffff81d1ff86>] ? pci_driver_init+0x12/0x12
[ 20.604748] [<ffffffff81002089>] do_one_initcall+0x89/0x1b0
[ 20.610833] [<ffffffff81ce4b30>] kernel_init_freeable+0x167/0x1fd
[ 20.617487] [<ffffffff81ce4bc6>] ? kernel_init_freeable+0x1fd/0x1fd
[ 20.624296] [<ffffffff816dd7c0>] ? rest_init+0x90/0x90
[ 20.629910] [<ffffffff816dd7c9>] kernel_init+0x9/0xf0
[ 20.635433] [<ffffffff816eb27c>] ret_from_fork+0x7c/0xb0
[ 20.641219] [<ffffffff816dd7c0>] ? rest_init+0x90/0x90
[ 20.646846] ---[ end trace 956618df162d6136 ]---
[ 20.661457] Magic number: 6:892:343

with this patch and command line:
debug console=hvc0 xen-blkback.log_stats=1 kgdboc=hvc0 xen-pciback.hide=(04:00.0)(07:00.0)(00:16.*)(03:01.0)(03:02.0)


From 777b4097bc6f2d83a8690d844a2a6285f392b7fa Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Mon, 21 Apr 2014 16:32:23 -0400
Subject: [PATCH] xen/pciback: PCI reset slot or bus - David's

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
drivers/xen/xen-pciback/pci_stub.c | 84 ++++++++++++++++++++++++++++++------
1 files changed, 70 insertions(+), 14 deletions(-)

diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index 030ac8f..21754fe 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -49,6 +49,8 @@ struct pcistub_device {

struct pci_dev *dev;
struct xen_pcibk_device *pdev;/* non-NULL if struct pci_dev is in use */
+
+ bool created_reset_file;
};

/* Access to pcistub_devices & seized_devices lists and the initialize_devices
@@ -63,6 +65,7 @@ static LIST_HEAD(pcistub_devices);
static int initialize_devices;
static LIST_HEAD(seized_devices);

+void pcistub_device_reset(struct work_struct *work);
static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev)
{
struct pcistub_device *psdev;
@@ -85,6 +88,8 @@ static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev)
return psdev;
}

+static void pcistub_remove_reset_file(struct pcistub_device *psdev);
+
/* Don't call this directly as it's called by pcistub_device_put */
static void pcistub_device_release(struct kref *kref)
{
@@ -100,14 +105,11 @@ static void pcistub_device_release(struct kref *kref)

xen_unregister_device_domain_owner(dev);

- /* Call the reset function which does not take lock as this
- * is called from "unbind" which takes a device_lock mutex.
- */
- __pci_reset_function_locked(dev);
+ /* Reset is done by the toolstack by using 'reset' on the SysFS. */
if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state))
dev_dbg(&dev->dev, "Could not reload PCI state\n");
- else
- pci_restore_state(dev);
+
+ pcistub_remove_reset_file(psdev);

if (dev->msix_cap) {
struct physdev_pci_device ppdev = {
@@ -123,9 +125,6 @@ static void pcistub_device_release(struct kref *kref)
err);
}

- /* Disable the device */
- xen_pcibk_reset_device(dev);
-
kfree(dev_data);
pci_set_drvdata(dev, NULL);

@@ -136,17 +135,22 @@ static void pcistub_device_release(struct kref *kref)
dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED;
pci_dev_put(dev);

+ dev_dbg(&dev->dev, "pcistub_device_release finished. Device gone\n");
+
kfree(psdev);
}

static inline void pcistub_device_get(struct pcistub_device *psdev)
{
kref_get(&psdev->kref);
+ pr_debug("%s, ref count is NOW at %d, %p\n", __func__, atomic_read(&psdev->kref.refcount), pci_get_drvdata(psdev->dev));
}

static inline void pcistub_device_put(struct pcistub_device *psdev)
{
+ pr_debug("%s, ref count is at %d %p\n", __func__, atomic_read(&psdev->kref.refcount), pci_get_drvdata(psdev->dev));
kref_put(&psdev->kref, pcistub_device_release);
+ pr_debug("%s, ref count is at %d %p\n", __func__, atomic_read(&psdev->kref.refcount), pci_get_drvdata(psdev->dev));
}

static struct pcistub_device *pcistub_device_find(int domain, int bus,
@@ -248,9 +252,10 @@ static void pcistub_reset_pci_dev(struct pci_dev *dev)
* and want to inhibit the user from fiddling with 'reset'
*/

- dev_dbg(&dev->dev, "resetting (FLR, D3, etc) the device\n");
+ dev_dbg(&dev->dev, "resetting (FLR, D3, bus, slot, etc) the device\n");

pci_reset_function(dev);
+
pci_restore_state(dev);

/* This disables the device. */
@@ -258,6 +263,52 @@ static void pcistub_reset_pci_dev(struct pci_dev *dev)

/* And cleanup up our emulated fields. */
xen_pcibk_config_reset_dev(dev);
+
+ /* Implement the rest. */
+}
+
+static ssize_t pcistub_reset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ unsigned long val;
+ ssize_t result = strict_strtoul(buf, 0, &val);
+
+ if (result < 0)
+ return result;
+
+ if (val != 1)
+ return -EINVAL;
+
+ pcistub_reset_pci_dev(pdev);
+
+ return 0;
+}
+static DEVICE_ATTR(reset, 0200, NULL, pcistub_reset_store);
+static void pcistub_remove_reset_file(struct pcistub_device *psdev)
+{
+ if (psdev && psdev->created_reset_file)
+ device_remove_file(&psdev->dev->dev, &dev_attr_reset);
+}
+
+static int pcistub_try_create_reset_file(struct pcistub_device *psdev)
+{
+ struct device *dev = &psdev->dev->dev;
+ struct kernfs_node *reset_dirent;
+ int ret;
+
+ reset_dirent = sysfs_get_dirent(dev->kobj.sd, "reset");
+ if (reset_dirent) {
+ sysfs_put(dev->kobj.sd);
+ return 0;
+ }
+
+ ret = device_create_file(dev, &dev_attr_reset);
+ if (ret < 0)
+ return ret;
+ psdev->created_reset_file = true;
+ return 0;
}

/*
@@ -291,10 +342,10 @@ void pcistub_put_pci_dev(struct pci_dev *dev)
* pcistub and xen_pcibk when AER is in processing
*/
down_write(&pcistub_sem);
- /* Cleanup our device
- * (so it's ready for the next domain)
+ /* Cleanup our device (so it's ready for the next domain)
+ * That is the job of the toolstack which has to call 'reset' before
+ * providing the PCI device to a guest (see pcistub_reset_store).
*/
- pcistub_reset_pci_dev(dev);

xen_unregister_device_domain_owner(dev);

@@ -409,7 +460,7 @@ static int pcistub_init_device(struct pci_dev *dev)
if (!dev_data->pci_saved_state)
dev_err(&dev->dev, "Could not store PCI conf saved state!\n");
else {
- dev_dbg(&dev->dev, "resetting (FLR, D3, etc) the device\n");
+ dev_dbg(&dev->dev, "resetting (FLR, D4, etc) the device\n");
__pci_reset_function_locked(dev);
pci_restore_state(dev);
}
@@ -483,6 +534,10 @@ static int pcistub_seize(struct pci_dev *dev)
if (!psdev)
return -ENOMEM;

+ err = pcistub_try_create_reset_file(psdev);
+ if (err < 0)
+ goto out;
+
spin_lock_irqsave(&pcistub_devices_lock, flags);

if (initialize_devices) {
@@ -502,6 +557,7 @@ static int pcistub_seize(struct pci_dev *dev)

spin_unlock_irqrestore(&pcistub_devices_lock, flags);

+out:
if (err)
pcistub_device_put(psdev);

--
1.7.7.6
>
> >
> > David


\
 
 \ /
  Last update: 2014-07-09 04:22    [W:0.205 / U:15.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site