lkml.org 
[lkml]   [2014]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 3/4] iio: hid-sensor-magn-3d: Scan for usage attributes before setting up iio channels
Hey Jonathan,

Thanks for the review. I'll be sure to fix up all the formatting you
mentioned and run it through the checkpatch.pl script.

> There should be an explanation here of what has changed from one version to
> the
> next.
Will include updates in future patch notes.

> The patches should have been run through checkpatch.pl (at least one place
> below
> indicates that didn't happen).
>
> Mostly little bits left. Now I would definitely like an ack or reviewed-by
> from Srinivas for this one if at all possible.
> Any tested-bys, particularly with parts that don't have the new channel
> types, would also be good.
>
> Jonathan
>
>> drivers/iio/magnetometer/hid-sensor-magn-3d.c | 111
>> +++++++++++++++++---------
>> 1 file changed, 75 insertions(+), 36 deletions(-)
>>
>> diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
>> b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
>> index 41cf29e..070d20e 100644
>> --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
>> +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
>> @@ -42,7 +42,8 @@ struct magn_3d_state {
>> struct hid_sensor_hub_callbacks callbacks;
>> struct hid_sensor_common common_attributes;
>> struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX];
>> - u32 magn_val[MAGN_3D_CHANNEL_MAX];
>> + u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX];
>> + u32 *iio_val;
>> int scale_pre_decml;
>> int scale_post_decml;
>> int scale_precision;
>> @@ -221,8 +222,8 @@ static int magn_3d_proc_event(struct
>> hid_sensor_hub_device *hsdev,
>> dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n");
>> if (atomic_read(&magn_state->common_attributes.data_ready))
>> hid_sensor_push_data(indio_dev,
>> - magn_state->magn_val,
>> - sizeof(magn_state->magn_val));
>> + magn_state->iio_val,
>> + sizeof(magn_state->iio_val));
>>
>> return 0;
>> }
>> @@ -236,52 +237,99 @@ static int magn_3d_capture_sample(struct
>> hid_sensor_hub_device *hsdev,
>> struct iio_dev *indio_dev = platform_get_drvdata(priv);
>> struct magn_3d_state *magn_state = iio_priv(indio_dev);
>> int offset;
>> - int ret = -EINVAL;
>> + int ret = 0;
>> + u32 *iio_val = NULL;
>
> This has me a little confused. You have an iio_val in your state
> structure and in this function. I can't actually find anywhere where
> the elements of the one in the state structure are ever assigned to
> anything.
>
>

I assign the pointer location of iio_vals to:
u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX];

I also added this array just for the locations. The assignment occurs
in the parse_report
function, after iio_vals is allocated, like this st->magn_val_addr[i]
= &(st->iio_val[*chan_count]).
I'll add a comment to explain the usage better.


>>
>> switch (usage_id) {
>> case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS:
>> case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS:
>> case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS:
>> offset = usage_id -
>> HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS;
>> - magn_state->magn_val[CHANNEL_SCAN_INDEX_X + offset] =
>> - *(u32 *)raw_data;
>> - ret = 0;
>> + iio_val = magn_state->magn_val_addr[CHANNEL_SCAN_INDEX_X +
>> offset];
>> +
>> break;
>> default:
>> - break;
>> + return -EINVAL;
>> }
>>
>> + if(iio_val)
>
> white space after if please.
>
>> + *iio_val = *(u32 *)raw_data;
>> + else
>> + ret = -EINVAL;
>> +
>> return ret;
>> }
>>
>> /* Parse report which is specific to an usage id*/
>> static int magn_3d_parse_report(struct platform_device *pdev,
>> struct hid_sensor_hub_device *hsdev,
>> - struct iio_chan_spec *channels,
>> + struct iio_chan_spec **channels,
>> + int *chan_count,
>> unsigned usage_id,
>> struct magn_3d_state *st)
>> {
>> - int ret;
>> + int ret = 0;
>> int i;
>> + int attr_count = 0;
>> +
>> + /* Scan for each usage attribute supported */
>> + for (i = 0; i < MAGN_3D_CHANNEL_MAX; i++) {
>> + u32 address = magn_3d_addresses[i];
>>
>> - for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
>> + /* Check if usage attribute exists in the sensor hub
>> device */
>> ret = sensor_hub_input_get_attribute_info(hsdev,
>> - HID_INPUT_REPORT,
>> - usage_id,
>> - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS +
>> i,
>> - &st->magn[CHANNEL_SCAN_INDEX_X + i]);
>> - if (ret < 0)
>> - break;
>> - magn_3d_adjust_channel_bit_mask(channels,
>> - CHANNEL_SCAN_INDEX_X + i,
>> - st->magn[CHANNEL_SCAN_INDEX_X + i].size);
>
> I would have preferred you kept the indenting the same as before. That would
> make it more obvious what changed.
>
>> + HID_INPUT_REPORT,
>> + usage_id,
>> + address,
>> + &(st->magn[i]));
>> + if (!ret)
>> + attr_count++;
>> }
>> - dev_dbg(&pdev->dev, "magn_3d %x:%x, %x:%x, %x:%x\n",
>> +
>> + dev_dbg(&pdev->dev, "magn_3d Found %d usage attributes\n",
>> + attr_count);
>> + dev_dbg(&pdev->dev, "magn_3d X: %x:%x Y: %x:%x Z: %x:%x\n",
>> st->magn[0].index,
>> st->magn[0].report_id,
>> st->magn[1].index, st->magn[1].report_id,
>> st->magn[2].index, st->magn[2].report_id);
>>
>> + if (attr_count > 0)
>> + ret = 0;
>
> This would suggest to me that you want to rename the ret above (used
> to indicate if a channel is there) as something more specific so you
> don't end up appearing to squash and error here...
>

The ret value above needs to be zeroed out as it is used to break out
of the for loop when scanning for usage attributes.
I will use a different variable name perhaps to distinguish the two.
>> + else
>> + return -EINVAL;
>
> Again your spacing is messed up. Please fix.
>
>> +
>> + /* Setup IIO channel array */
>> + *channels = devm_kcalloc(&pdev->dev, attr_count,
>> +
>
> The resulting indenting here is a complete mess. Please fix.
>
>
> sizeof(struct iio_chan_spec),
>>
>> +
>> GFP_KERNEL);
>> + if (!*channels) {
>> + dev_err(&pdev->dev, "failed to allocate space for iio
>> channels\n");
>> + return -ENOMEM;
>> + }
>> +
>> + st->iio_val = devm_kcalloc(&pdev->dev, attr_count,
>> +
>> sizeof(u32),
>> +
>> GFP_KERNEL);
>> + if (!st->iio_val) {
>> + dev_err(&pdev->dev, "failed to allocate space for iio
>> values array\n");
>> + return -ENOMEM;
>> + }
>> +
>> + for (i = 0, *chan_count = 0;
>> + i < MAGN_3D_CHANNEL_MAX && *chan_count < attr_count;
>> + i++)
>> + {
>> + if (st->magn[i].index >= 0) {
>> + /* Setup IIO channel struct */
>> + *channels[*chan_count] = magn_3d_channels[i];
>> +
>> + st->magn_val_addr[i] =
>> &(st->iio_val[*chan_count]);
>> + magn_3d_adjust_channel_bit_mask(*channels,
>> *chan_count, st->magn[i].size);
>
> The above should be wrapped appropriately.
>
>> + (*chan_count)++;
>> + }
>> + }
>> +
>> st->scale_precision = hid_sensor_format_scale(
>> HID_USAGE_SENSOR_COMPASS_3D,
>> &st->magn[CHANNEL_SCAN_INDEX_X],
>> @@ -311,6 +359,7 @@ static int hid_magn_3d_probe(struct platform_device
>> *pdev)
>> struct magn_3d_state *magn_state;
>> struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
>> struct iio_chan_spec *channels;
>> + int chan_count = 0;
>>
>> indio_dev = devm_iio_device_alloc(&pdev->dev,
>> sizeof(struct magn_3d_state));
>> @@ -331,22 +380,15 @@ static int hid_magn_3d_probe(struct platform_device
>> *pdev)
>> return ret;
>> }
>>
>> - channels = kmemdup(magn_3d_channels, sizeof(magn_3d_channels),
>> - GFP_KERNEL);
>> - if (!channels) {
>> - dev_err(&pdev->dev, "failed to duplicate channels\n");
>> - return -ENOMEM;
>> - }
>> -
>> - ret = magn_3d_parse_report(pdev, hsdev, channels,
>> - HID_USAGE_SENSOR_COMPASS_3D, magn_state);
>> + ret = magn_3d_parse_report(pdev, hsdev, &channels,
>> + &chan_count, HID_USAGE_SENSOR_COMPASS_3D,
>> magn_state);
>> if (ret) {
>> dev_err(&pdev->dev, "failed to setup attributes\n");
>> - goto error_free_dev_mem;
>> + return ret;
>> }
>>
>> indio_dev->channels = channels;
>> - indio_dev->num_channels = ARRAY_SIZE(magn_3d_channels);
>> + indio_dev->num_channels = chan_count;
>> indio_dev->dev.parent = &pdev->dev;
>> indio_dev->info = &magn_3d_info;
>> indio_dev->name = name;
>> @@ -356,7 +398,7 @@ static int hid_magn_3d_probe(struct platform_device
>> *pdev)
>> NULL, NULL);
>> if (ret) {
>> dev_err(&pdev->dev, "failed to initialize trigger
>> buffer\n");
>> - goto error_free_dev_mem;
>> + return ret;
>> }
>> atomic_set(&magn_state->common_attributes.data_ready, 0);
>> ret = hid_sensor_setup_trigger(indio_dev, name,
>> @@ -390,8 +432,6 @@ error_remove_trigger:
>> hid_sensor_remove_trigger(&magn_state->common_attributes);
>> error_unreg_buffer_funcs:
>> iio_triggered_buffer_cleanup(indio_dev);
>> -error_free_dev_mem:
>> - kfree(indio_dev->channels);
>> return ret;
>> }
>>
>> @@ -406,7 +446,6 @@ static int hid_magn_3d_remove(struct platform_device
>> *pdev)
>> iio_device_unregister(indio_dev);
>> hid_sensor_remove_trigger(&magn_state->common_attributes);
>> iio_triggered_buffer_cleanup(indio_dev);
>> - kfree(indio_dev->channels);
>>
>> return 0;
>> }
>>
>


\
 
 \ /
  Last update: 2014-07-08 20:21    [W:0.101 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site