lkml.org 
[lkml]   [2014]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 06/18] power: reset: Add AT91 reset driver
On 07/07/2014 16:25, Maxime Ripard :
> Implement the reset behaviour of the various AT91 SoCS in drivers/power/reset.
>
> It used to be (and still is) located in arch/arm/mach-at91, and in order to
> preserve bisectability is not removed yet, but every board should be converted
> to use this driver instead.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
> drivers/power/reset/Kconfig | 7 ++
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/at91-reset.c | 246 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 254 insertions(+)
> create mode 100644 drivers/power/reset/at91-reset.c
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 19d546c5edfa..b3fef01d7cbb 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -14,6 +14,13 @@ config POWER_RESET_AS3722
> help
> This driver supports turning off board via a ams AS3722 power-off.
>
> +config POWER_RESET_AT91_RESET
> + bool "Atmel AT91 reset driver"
> + default SOC_AT91SAM9 || SOC_SAMA5
> + help
> + This driver supports restart for Atmel AT91SAM9 and SAMA5
> + SoCs
> +
> config POWER_RESET_AXXIA
> bool "LSI Axxia reset driver"
> depends on ARCH_AXXIA
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index dde2e8bbac53..1599214b91d9 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -1,4 +1,5 @@
> obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
> +obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
> obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
> obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
> obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
> new file mode 100644
> index 000000000000..7b91ca82854e
> --- /dev/null
> +++ b/drivers/power/reset/at91-reset.c
> @@ -0,0 +1,246 @@
> +/*
> + * Atmel AT91 SAM9 SoCs reset code
> + *
> + * Copyright (C) 2007 Atmel Corporation.
> + * Copyright (C) BitBox Ltd 2010
> + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com>
> + * Copyright (C) 2014 Free Electrons
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +
> +#include <asm/system_misc.h>
> +
> +#include <mach/at91sam9_ddrsdr.h>
> +#include <mach/at91sam9_sdramc.h>
> +
> +#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */
> +#define AT91_RSTC_PROCRST BIT(0) /* Processor Reset */
> +#define AT91_RSTC_PERRST BIT(2) /* Peripheral Reset */
> +#define AT91_RSTC_EXTRST BIT(3) /* External Reset */
> +#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
> +
> +#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */
> +#define AT91_RSTC_URSTS BIT(0) /* User Reset Status */
> +#define AT91_RSTC_RSTTYP GENMASK(10, 8) /* Reset Type */
> +#define AT91_RSTC_NRSTL BIT(16) /* NRST Pin Level */
> +#define AT91_RSTC_SRCMP BIT(17) /* Software Reset Command in Progress */
> +
> +#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */
> +#define AT91_RSTC_URSTEN BIT(0) /* User Reset Enable */
> +#define AT91_RSTC_URSTIEN BIT(4) /* User Reset Interrupt Enable */
> +#define AT91_RSTC_ERSTL GENMASK(11, 8) /* External Reset Length */
> +
> +enum reset_type {
> + RESET_TYPE_GENERAL = 0,
> + RESET_TYPE_WAKEUP = 1,
> + RESET_TYPE_WATCHDOG = 2,
> + RESET_TYPE_SOFTWARE = 3,
> + RESET_TYPE_USER = 4,
> +};
> +
> +static void __iomem *at91_ramc_base[2], *at91_rstc_base;
> +

Here I want to add the comments that we put in the assembly file:

"
* unless the SDRAM is cleanly shutdown before we hit the
* reset register it can be left driving the data bus and
* killing the chance of a subsequent boot from NAND
"

Just to keep people informed right above the code that implement it...

> +static void at91sam9260_restart(enum reboot_mode mode, const char *cmd)
> +{
> + asm volatile(
> + /* Align to cache lines */
> + ".balign 32\n\t"
> +
> + /* Disable SDRAM accesses */
> + "str %2, [%0, #" __stringify(AT91_SDRAMC_TR) "]\n\t"
> +
> + /* Power down SDRAM */
> + "str %3, [%0, #" __stringify(AT91_SDRAMC_LPR) "]\n\t"
> +
> + /* Reset CPU */
> + "str %4, [%1, #" __stringify(AT91_RSTC_CR) "]\n\t"
> +
> + "b .\n\t"
> + :
> + : "r" (at91_ramc_base[0]),
> + "r" (at91_rstc_base),
> + "r" (1),
> + "r" (AT91_SDRAMC_LPCB_POWER_DOWN),
> + "r" (AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST));
> +}
> +
> +
> +static void at91sam9g45_restart(enum reboot_mode mode, const char *cmd)
> +{
> + asm volatile(
> + /*
> + * Test wether we have a second RAM controller to care
> + * about.
> + *
> + * First, test that we can dereference the virtual address.
> + */
> + "cmp %1, #0\n\t"
> + "beq 1f\n\t"
> +
> + /* Then, test that the RAM controller is enabled */
> + "ldr r0, [%1]\n\t"
> + "cmp r0, #0\n\t"
> +
> + /* Align to cache lines */
> + ".balign 32\n\t"
> +
> + /* Disable SDRAM0 accesses */
> + "1: str %3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
> + /* Power down SDRAM0 */
> + " str %4, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
> + /* Disable SDRAM1 accesses */
> + " strne %3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
> + /* Power down SDRAM1 */
> + " strne %4, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
> + /* Reset CPU */
> + " str %5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t"
> +
> + " b .\n\t"
> + :
> + : "r" (at91_ramc_base[0]),
> + "r" (at91_ramc_base[1]),
> + "r" (at91_rstc_base),
> + "r" (1),
> + "r" (AT91_DDRSDRC_LPCB_POWER_DOWN),
> + "r" (AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST)
> + : "r0");
> +}
> +
> +static void __init at91_reset_status(struct platform_device *pdev)
> +{
> + u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
> + char *reason;
> +
> + switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
> + case RESET_TYPE_GENERAL:
> + reason = "general reset";
> + break;
> + case RESET_TYPE_WAKEUP:
> + reason = "wakeup";
> + break;
> + case RESET_TYPE_WATCHDOG:
> + reason = "watchdog reset";
> + break;
> + case RESET_TYPE_SOFTWARE:
> + reason = "software reset";
> + break;
> + case RESET_TYPE_USER:
> + reason = "user reset";
> + break;
> + default:
> + reason = "unknown reset";
> + break;
> + }
> +
> + pr_info("AT91: Starting after %s\n", reason);
> +}
> +
> +static struct of_device_id at91_ramc_of_match[] = {
> + { .compatible = "atmel,at91sam9260-sdramc", },
> + { .compatible = "atmel,at91sam9g45-ddramc", },
> + { /* sentinel */ }
> +};
> +
> +static struct of_device_id at91_reset_of_match[] = {
> + { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart },
> + { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },

For the *future*, we have to keep in mind that we have another choice
with sama5d3: this SoC doesn't have to implement the workaround. But for
sure, it is another patch/"patch series".

> + { /* sentinel */ }
> +};
> +
> +static int at91_reset_of_probe(struct platform_device *pdev)
> +{
> + const struct of_device_id *match;
> + struct device_node *np;
> + int idx = 0;
> +
> + at91_rstc_base = of_iomap(pdev->dev.of_node, 0);
> + if (!at91_rstc_base) {
> + dev_err(&pdev->dev, "Could not map reset controller address\n");
> + return -ENODEV;
> + }
> +
> + for_each_matching_node(np, at91_ramc_of_match) {
> + at91_ramc_base[idx] = of_iomap(np, 0);
> + if (!at91_ramc_base[idx]) {
> + dev_err(&pdev->dev, "Could not map ram controller address\n");
> + return -ENODEV;
> + }
> + idx++;
> + }
> +
> + match = of_match_node(at91_reset_of_match, pdev->dev.of_node);
> + arm_pm_restart = match->data;
> +
> + return 0;
> +}
> +
> +static int at91_reset_platform_probe(struct platform_device *pdev)
> +{
> + const struct platform_device_id *match;
> + struct resource *res;
> + int idx = 0;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + at91_rstc_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(at91_rstc_base)) {
> + dev_err(&pdev->dev, "Could not map reset controller address\n");
> + return PTR_ERR(at91_rstc_base);
> + }
> +
> + for (idx = 0; idx < 2; idx++) {
> + res = platform_get_resource(pdev, IORESOURCE_MEM, idx + 1 );
> + at91_ramc_base[idx] = devm_ioremap(&pdev->dev, res->start,
> + resource_size(res));
> + if (IS_ERR(at91_ramc_base[idx])) {
> + dev_err(&pdev->dev, "Could not map ram controller address\n");
> + return PTR_ERR(at91_rstc_base);
> + }
> + }
> +
> + match = platform_get_device_id(pdev);
> + arm_pm_restart = (void (*)(enum reboot_mode, const char*))
> + match->driver_data;
> +
> + return 0;
> +}
> +
> +static int at91_reset_probe(struct platform_device *pdev)
> +{
> + int ret;
> +
> + if (pdev->dev.of_node)
> + ret = at91_reset_of_probe(pdev);
> + else
> + ret = at91_reset_platform_probe(pdev);
> +
> + if (ret)
> + return ret;
> +
> + at91_reset_status(pdev);
> +
> + return 0;
> +}
> +
> +static struct platform_device_id at91_reset_plat_match[] = {
> + { "at91-sam9260-reset", (unsigned long)at91sam9260_restart },
> + { "at91-sam9g45-reset", (unsigned long)at91sam9g45_restart },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver at91_reset_driver = {
> + .probe = at91_reset_probe,
> + .driver = {
> + .name = "at91-reset",
> + .of_match_table = at91_reset_of_match,
> + },
> + .id_table = at91_reset_plat_match,
> +};
> +module_platform_driver(at91_reset_driver);
>


--
Nicolas Ferre


\
 
 \ /
  Last update: 2014-07-08 20:01    [W:0.173 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site