lkml.org 
[lkml]   [2014]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] hso: fix deadlock when receiving bursts of data
From
Date
On Mon, 2014-07-07 at 11:06 +0200, Olivier Sobrie wrote:
> When the module sends bursts of data, sometimes a deadlock happens in
> the hso driver when the tty buffer doesn't get the chance to be flushed
> quickly enough.
>
> To avoid this, first, we remove the endless while loop in
> put_rx_bufdata() which is the root cause of the deadlock.
> Secondly, when there is no room anymore in the tty buffer, we set up a
> timer of 100 msecs to give a chance to the upper layer to flush the tty
> buffer and make room for new data.

I assume this problem happens when using PPP for data transfer, instead
of using the network port that the modules expose? Or maybe the NMEA
port? I can't imagine that AT commands would make this happen...

Dan

> Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
> ---
> drivers/net/usb/hso.c | 51 +++++++++++++++++++++++++++++++++----------------
> 1 file changed, 35 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
> index 9ca2b41..1dff74f 100644
> --- a/drivers/net/usb/hso.c
> +++ b/drivers/net/usb/hso.c
> @@ -106,6 +106,8 @@
>
> #define MAX_RX_URBS 2
>
> +#define UNTHROTTLE_TIMEOUT 100 /* msecs */
> +
> /*****************************************************************************/
> /* Debugging functions */
> /*****************************************************************************/
> @@ -261,6 +263,7 @@ struct hso_serial {
> u16 curr_rx_urb_offset;
> u8 rx_urb_filled[MAX_RX_URBS];
> struct tasklet_struct unthrottle_tasklet;
> + struct timer_list unthrottle_timer;
> };
>
> struct hso_device {
> @@ -1161,13 +1164,18 @@ static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
> while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
> curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
> count = put_rxbuf_data(curr_urb, serial);
> - if (count == -1)
> - return;
> if (count == 0) {
> serial->curr_rx_urb_idx++;
> if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
> serial->curr_rx_urb_idx = 0;
> hso_resubmit_rx_bulk_urb(serial, curr_urb);
> + } else if (count > 0) {
> + mod_timer(&serial->unthrottle_timer,
> + jiffies
> + + msecs_to_jiffies(UNTHROTTLE_TIMEOUT));
> + break;
> + } else {
> + break;
> }
> }
> }
> @@ -1251,6 +1259,11 @@ static void hso_unthrottle(struct tty_struct *tty)
> tasklet_hi_schedule(&serial->unthrottle_tasklet);
> }
>
> +static void hso_unthrottle_schedule(unsigned long data)
> +{
> + tasklet_schedule((struct tasklet_struct *)data);
> +}
> +
> /* open the requested serial port */
> static int hso_serial_open(struct tty_struct *tty, struct file *filp)
> {
> @@ -1286,6 +1299,10 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp)
> tasklet_init(&serial->unthrottle_tasklet,
> (void (*)(unsigned long))hso_unthrottle_tasklet,
> (unsigned long)serial);
> + serial->unthrottle_timer.function = hso_unthrottle_schedule;
> + serial->unthrottle_timer.data =
> + (unsigned long)&serial->unthrottle_tasklet;
> + init_timer(&serial->unthrottle_timer);
> result = hso_start_serial_device(serial->parent, GFP_KERNEL);
> if (result) {
> hso_stop_serial_device(serial->parent);
> @@ -1333,6 +1350,7 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
> tty_port_tty_set(&serial->port, NULL);
> if (!usb_gone)
> hso_stop_serial_device(serial->parent);
> + del_timer_sync(&serial->unthrottle_timer);
> tasklet_kill(&serial->unthrottle_tasklet);
> }
>
> @@ -2012,22 +2030,23 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
>
> tty = tty_port_tty_get(&serial->port);
>
> + if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
> + tty_kref_put(tty);
> + return -1;
> + }
> +
> /* Push data to tty */
> - write_length_remaining = urb->actual_length -
> - serial->curr_rx_urb_offset;
> D1("data to push to tty");
> - while (write_length_remaining) {
> - if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
> - tty_kref_put(tty);
> - return -1;
> - }
> - curr_write_len = tty_insert_flip_string(&serial->port,
> - urb->transfer_buffer + serial->curr_rx_urb_offset,
> - write_length_remaining);
> - serial->curr_rx_urb_offset += curr_write_len;
> - write_length_remaining -= curr_write_len;
> - tty_flip_buffer_push(&serial->port);
> - }
> + write_length_remaining = urb->actual_length -
> + serial->curr_rx_urb_offset;
> + curr_write_len =
> + tty_insert_flip_string(&serial->port,
> + urb->transfer_buffer
> + + serial->curr_rx_urb_offset,
> + write_length_remaining);
> + serial->curr_rx_urb_offset += curr_write_len;
> + write_length_remaining -= curr_write_len;
> + tty_flip_buffer_push(&serial->port);
> tty_kref_put(tty);
>
> if (write_length_remaining == 0) {




\
 
 \ /
  Last update: 2014-07-07 20:01    [W:0.116 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site