lkml.org 
[lkml]   [2014]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 3.16rc3 multiplatform, Armada 370 and IOMMU: unbootable kernel
On 05 Jul 01:59 PM, Greg Kroah-Hartman wrote:
> On Sat, Jul 05, 2014 at 12:03:08PM -0300, Ezequiel Garcia wrote:
> > After following Gregory's stacktrace (also reproduced here):
> >
> > [<c02451f8>] (iommu_bus_notifier) from [<c00512e8>] (notifier_call_chain+0x64/0x9c)
> > [<c00512e8>] (notifier_call_chain) from [<c00514cc>] (__blocking_notifier_call_chain+0x40/0x58)
> > [<c00514cc>] (__blocking_notifier_call_chain) from [<c00514f8>] (blocking_notifier_call_chain+0x14/0x1c)
> > [<c00514f8>] (blocking_notifier_call_chain) from [<c01d225c>] (device_add+0x424/0x524)
> > [<c01d225c>] (device_add) from [<c0186d90>] (pci_device_add+0xec/0x110)
> > [<c0186d90>] (pci_device_add) from [<c0186e54>] (pci_scan_single_device+0xa0/0xac)
> >
> > I added a few printks and found that the problem is that the iommu_bus_notifier is
> > called for the 'pci' bus type, which has a null iommu_ops.
> >
> > On 04 Jul 10:47 AM, Laurent Pinchart wrote:
> > [..]
> > >
> > > We need a quick fix for v3.16, ...
> >
> > Therefore, a quick fix would be to simply check for that:
> >
> > diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> > index e5555fc..b712cb2 100644
> > --- a/drivers/iommu/iommu.c
> > +++ b/drivers/iommu/iommu.c
> > @@ -536,6 +536,9 @@ static int iommu_bus_notifier(struct notifier_block *nb,
> > struct iommu_group *group;
> > unsigned long group_action = 0;
> >
> > + if (!ops)
> > + return 0;
> > +
> > /*
> > * ADD/DEL call into iommu driver ops if provided, which may
> > * result in ADD/DEL notifiers to group->notifier
> >
> > This (nasty workaround?) patch makes the problem go away.
> >
> > [..]
> > > > So it also boot well in 3.15 and then failed in 3.16-rc3. I hope it will
> > > > help the developers of the OMAP IOMMU driver to fix it.
> > >
> > > Thank you. I've had a look at the OMAP IOMMU driver changes between v3.15 and
> > > v3.16-rc3, and didn't find at first sight any change that could explain the
> > > crash.
> > >
> > > 286f600 iommu/omap: Fix map protection value handling
> > > 67b779d iommu/omap: Remove comment about supporting single page mappings only
> > > f7129a0 iommu/omap: Fix 'no page for' debug message in flush_iotlb_page()
> > > 5acc97d iommu/omap: Move to_iommu definition from omap-iopgtable.h
> > > 2ac6133 iommu/omap: Remove omap_iommu_domain_has_cap() function
> > > d760e3e iommu/omap: Correct init value of iotlb_entry valid field
> > >
> > > Could you try reverting those changes and retest ? If the problem doesn't
> > > disappear, we'll need to look somewhere else.
> > >
> >
> > I reverted the above commits but nothing changed. I'm far from being an expert,
> > but it sounds odd to have this bus notifier (that got registered for the
> > platform bus type) called by a pci bus type.
>
> Why wouldn't the PCI bus set this up for its devices? Are you
> "assuming" you know the bus type and that's the issue?
>

Thanks for looking at this.

I guess I snipped the thread and lost most of the information about the panic.
Here's the original bug report:

http://www.spinics.net/lists/arm-kernel/msg344059.html

The problem reported involves enabling OMAP IOMMU driver and not any other IOMMU
driver. Doing some tracing and adding a few prints, we found that
omap_iommu_init() sets a bus notifier for the platform bus type:

omap_iommu_init -> bus_set_iommu -> iommu_bus_init:

static void iommu_bus_init(struct bus_type *bus, struct iommu_ops *ops)
{
bus_register_notifier(bus, &iommu_bus_nb);
bus_for_each_dev(bus, NULL, ops, add_iommu_group);
}

But the iommu bus notifier gets called for the 'pci' bus type, which
has the iommu_ops field NULL (since it hasn't been set for iommu).

The panic is here when the NULL field is dereferenced:

static int iommu_bus_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
struct iommu_ops *ops = dev->bus->iommu_ops;


> I see the a number of different places this is being initialized for the
> pci bus.
>
> Ah, look at drivers/iommu/fsl_pamu_domain.c, odds are, it shouldn't be
> doing that logic in the pamu_domain_init() code, using the same bus ops
> for different bus types, that's ripe for major problems...
>

Maybe I'm missing something, but since the fsl driver is not enabled it has
nothing to do. And since the OMAP IOMMU doesn't set the iommu bus notifier
for the 'pci' bus type, I was wondering if there's a problem with the bus
notifier itself.

I hope the above makes sense.

Thanks again for helping out,
--
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-07-07 13:41    [W:6.702 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site