lkml.org 
[lkml]   [2014]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] pciehp: Remove the field controller->no_cmd_completed
On Thu, Jun 26, 2014 at 11:58:55AM -0700, Rajat Jain wrote:
> After following recent cleanups by Bjorn:
>
> http://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/hotplug
>
> 2cc56f3 PCI: pciehp: Remove assumptions about which commands cause
> 40b9608 PCI: pciehp: Compute timeout from hotplug command start time
> 3461a06 PCI: pciehp: Wait for hotplug command completion lazily
> 4283c70 PCI: pciehp: Make pcie_wait_cmd() self-contained
>
> the bitfield no_cmd_complete is not really needed anymore, as there is
> only a single occurance of its use. Hence remove the unnecessary bit
> field, and use existing macro NO_CMD_CMPL() instead.
>
> Signed-off-by: Rajat Jain <rajatxjain@gmail.com>
> Signed-off-by: Rajat Jain <rajatjain@juniper.net>
> Signed-off-by: Guenter Roeck <groeck@juniper.net>

Great, thanks for fixing this! Applied to pci/hotplug for v3.17.

> ---
> (This is rebased on top of Bjorn's pci/hotplug branch mentioned above)
>
> drivers/pci/hotplug/pciehp.h | 1 -
> drivers/pci/hotplug/pciehp_hpc.c | 11 +----------
> 2 files changed, 1 insertion(+), 11 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
> index c496258..9e5a9fb 100644
> --- a/drivers/pci/hotplug/pciehp.h
> +++ b/drivers/pci/hotplug/pciehp.h
> @@ -96,7 +96,6 @@ struct controller {
> struct timer_list poll_timer;
> unsigned long cmd_started; /* jiffies */
> unsigned int cmd_busy:1;
> - unsigned int no_cmd_complete:1;
> unsigned int link_active_reporting:1;
> unsigned int notification_enabled:1;
> unsigned int power_fault_detected;
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index a3a5c65..f7c3709 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -140,7 +140,7 @@ static void pcie_wait_cmd(struct controller *ctrl)
> * If the controller does not generate notifications for command
> * completions, we never need to wait between writes.
> */
> - if (ctrl->no_cmd_complete)
> + if (NO_CMD_CMPL(ctrl))
> return;
>
> if (!ctrl->cmd_busy)
> @@ -772,15 +772,6 @@ struct controller *pcie_init(struct pcie_device *dev)
> init_waitqueue_head(&ctrl->queue);
> dbg_ctrl(ctrl);
>
> - /*
> - * Controller doesn't notify of command completion if the "No
> - * Command Completed Support" bit is set in Slot Capabilities.
> - * If set, it means the controller can accept hotplug commands
> - * with no delay between them.
> - */
> - if (NO_CMD_CMPL(ctrl))
> - ctrl->no_cmd_complete = 1;
> -
> /* Check if Data Link Layer Link Active Reporting is implemented */
> pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap);
> if (link_cap & PCI_EXP_LNKCAP_DLLLARC) {
> --
> 1.7.9.5
>


\
 
 \ /
  Last update: 2014-07-05 20:21    [W:0.142 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site