lkml.org 
[lkml]   [2014]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: Add I2S dt node for Exynos3250
On 07/04/2014 04:43 PM, Kukjin Kim wrote:
> Chanwoo Choi wrote:
>>
>> From: Tomasz Figa <t.figa@samsung.com>
>>
>> This patch add I2S (Inter-IC Sound) dt node which supports 1-port stereo
>> (1 channels) IIS-bus for audio interface with DMA-based operation.
>>
>> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
>> Signed-off-by: Inha Song <ideal.song@samsung.com>
>> Tested-by: Inha Song <ideal.song@samsung.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos3250.dtsi | 13 +++++++++++++
>> 1 file changed, 13 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
>> index 1f8384f..e9017ef 100644
>> --- a/arch/arm/boot/dts/exynos3250.dtsi
>> +++ b/arch/arm/boot/dts/exynos3250.dtsi
>> @@ -644,6 +644,19 @@
>> status = "disabled";
>> };
>>
>> + i2s: i2s@13970000 {
>> + compatible = "samsung,s3c6410-i2s";
>> + reg = <0x13970000 0x100>;
>> + interrupts = <0 126 0>;
>> + clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
>> + clock-names = "iis", "i2s_opclk0";
>> + dmas = <&pdma0 14>, <&pdma0 13>;
>> + dma-names = "tx", "rx";
>> + pinctrl-0 = <&i2s2_bus>;
>> + pinctrl-name = "default";
>
> To put 'pinctrl-name' and then 'pinctrl-0' is better? :-)

The i2s dt node can drop "pinctrl-0/pinctrl-name" properties.

I will re-send this patchset (v2) after fixing it.

Best Regards,
Chanwoo Choi


\
 
 \ /
  Last update: 2014-07-04 10:41    [W:0.086 / U:3.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site