| From | Greg Kroah-Hartman <> | Subject | [PATCH 3.15 07/66] Input: elantech - dont set bit 1 of reg_10 when the no_hw_res quirk is set | Date | Fri, 4 Jul 2014 15:14:06 -0700 |
| |
3.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <hdegoede@redhat.com>
commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream.
The touchpad on the GIGABYTE U2442 not only stops communicating when we try to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS versions also when we set bit 1 (enable two finger mode auto correct).
I've asked the original reporter of: https://bugzilla.kernel.org/show_bug.cgi?id=61151
To check that not setting bit 1 does not lead to any adverse effects on his model / BIOS revision, and it does not, so this commit fixes the touchpad not working on these versions by simply never setting bit 1 for laptop models with the no_hw_res quirk.
Reported-and-tested-by: James Lademann <jwlademann@gmail.com> Tested-by: Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
--- drivers/input/mouse/elantech.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -849,7 +849,7 @@ static int elantech_set_absolute_mode(st if (etd->set_hw_resolution) etd->reg_10 = 0x0b; else - etd->reg_10 = 0x03; + etd->reg_10 = 0x01; if (elantech_write_reg(psmouse, 0x10, etd->reg_10)) rc = -1; @@ -1350,7 +1350,8 @@ static int elantech_reconnect(struct psm } /* - * Some hw_version 3 models go into error state when we try to set bit 3 of r10 + * Some hw_version 3 models go into error state when we try to set + * bit 3 and/or bit 1 of r10. */ static const struct dmi_system_id no_hw_res_dmi_table[] = { #if defined(CONFIG_DMI) && defined(CONFIG_X86)
|