lkml.org 
[lkml]   [2014]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: Add I2S dt node for Exynos3250
Hi Chanwoo,

On 03.07.2014 09:52, Chanwoo Choi wrote:
> From: Tomasz Figa <t.figa@samsung.com>
>
> This patch add I2S (Inter-IC Sound) dt node which supports 1-port stereo
> (1 channels) IIS-bus for audio interface with DMA-based operation.
>
> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Tested-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/boot/dts/exynos3250.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
> index 1f8384f..e9017ef 100644
> --- a/arch/arm/boot/dts/exynos3250.dtsi
> +++ b/arch/arm/boot/dts/exynos3250.dtsi
> @@ -644,6 +644,19 @@
> status = "disabled";
> };
>
> + i2s: i2s@13970000 {

Shouldn't the label be rather called "i2s2" as the pinctrl entry below
suggests?

> + compatible = "samsung,s3c6410-i2s";
> + reg = <0x13970000 0x100>;
> + interrupts = <0 126 0>;
> + clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
> + clock-names = "iis", "i2s_opclk0";
> + dmas = <&pdma0 14>, <&pdma0 13>;
> + dma-names = "tx", "rx";
> + pinctrl-0 = <&i2s2_bus>;
> + pinctrl-name = "default";

"pinctrl-name" is not a valid property. I suppose it should be
"pinctrl-names".

Best regards,
Tomasz


\
 
 \ /
  Last update: 2014-07-04 12:41    [W:0.108 / U:8.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site