lkml.org 
[lkml]   [2014]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 2/5] regulator: core: Allow to get voltage count and list from parent
Date
Load switches are modeled as regulators but they just provide
the voltage of their parent input supply. So, the drivers for
these switches usually neither provide a .list_voltage handler
not set a .n_voltages count. But there is code in the kernel
that assumes that all regulators should be able to provide this
information (e.g: cpufreq and mmc subsystems).

If the voltage count and list are not available for a regulator
and it has a parent input supply, then use the parent values.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
drivers/regulator/core.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 089cea8..a3c3785 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2186,7 +2186,13 @@ int regulator_count_voltages(struct regulator *regulator)
{
struct regulator_dev *rdev = regulator->rdev;

- return rdev->desc->n_voltages ? : -EINVAL;
+ if (rdev->desc->n_voltages)
+ return rdev->desc->n_voltages;
+
+ if (!rdev->supply)
+ return -EINVAL;
+
+ return regulator_count_voltages(rdev->supply);
}
EXPORT_SYMBOL_GPL(regulator_count_voltages);

@@ -2209,12 +2215,17 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector)
if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
return rdev->desc->fixed_uV;

- if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
+ if (ops->list_voltage) {
+ if (selector >= rdev->desc->n_voltages)
+ return -EINVAL;
+ mutex_lock(&rdev->mutex);
+ ret = ops->list_voltage(rdev, selector);
+ mutex_unlock(&rdev->mutex);
+ } else if (rdev->supply) {
+ ret = regulator_list_voltage(rdev->supply, selector);
+ } else {
return -EINVAL;
-
- mutex_lock(&rdev->mutex);
- ret = ops->list_voltage(rdev, selector);
- mutex_unlock(&rdev->mutex);
+ }

if (ret > 0) {
if (ret < rdev->constraints->min_uV)
--
2.0.0.rc2


\
 
 \ /
  Last update: 2014-07-29 19:01    [W:0.735 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site