lkml.org 
[lkml]   [2014]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 05/11] ARM: dts: zynq: Add QSPI for Parallella
On 07/25/2014 01:18 AM, Sören Brinkmann wrote:
> On Fri, 2014-07-25 at 01:00AM +0200, Andreas Färber wrote:
>> Prepare SPI0 and SPI1 while at it.

Patch subject is incorrect. You are adding SPI and QSPI.

>>
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>> ---
>> v2: New
>>
>> arch/arm/boot/dts/zynq-7000.dtsi | 37 +++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/zynq-parallella.dts | 4 ++++
>> 2 files changed, 41 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
>> index 8fd826a..eed3df0 100644
>> --- a/arch/arm/boot/dts/zynq-7000.dtsi
>> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
>> @@ -122,6 +122,30 @@
>> interrupts = <0 50 4>;
>> };
>>
>> + spi0: spi@e0006000 {
>> + compatible = "xlnx,zynq-spi-r1p6";
>> + reg = <0xe0006000 0x1000>;
>> + status = "disabled";
>> + interrupt-parent = <&intc>;
>> + interrupts = <0 26 4>;
>> + clocks = <&clkc 25>, <&clkc 34>;
>> + clock-names = "ref_clk", "pclk";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> +
>> + spi1: spi@e0007000 {
>> + compatible = "xlnx,zynq-spi-r1p6";
>> + reg = <0xe0007000 0x1000>;
>> + status = "disabled";
>> + interrupt-parent = <&intc>;
>> + interrupts = <0 49 4>;
>> + clocks = <&clkc 26>, <&clkc 35>;
>> + clock-names = "ref_clk", "pclk";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> +
> Until here things look good.
>
>> gem0: ethernet@e000b000 {
>> compatible = "cdns,gem";
>> reg = <0xe000b000 0x4000>;
>> @@ -140,6 +164,19 @@
>> clock-names = "pclk", "hclk", "tx_clk";
>> };
>>
>> + qspi: qspi@e000d000 {
>> + compatible = "xlnx,zynq-spi-r1p6";
>> + reg = <0xe000d000 0x1000>;
>> + status = "disabled";
>> + interrupt-parent = <&intc>;
>> + interrupts = <0 19 4>;
>> + clocks = <&clkc 10>, <&clkc 43>;
>> + clock-names = "ref_clk", "pclk";
>> + num-cs = <1>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> +
> I'm not sure what the status of this driver is. I think QSPI is still
> under review on the mailing lists and I don't think we should add this
> yet.

Driver for qspi is not in the mainline yet but it doesn't mean
that this fragment won't work.
Harini: Can you please correct me if I am wrong?

I would prefer to send two separate patches.

1. just add SPI to zynq
2. if Harini confirms that it is working I think that make sense to enable
at least simple mode for qspi. That's why not a problem to add it too.
It means qspi patch with enabling for your board as second patch.

Thanks,
Michal

--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-07-25 10:41    [W:0.355 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site