lkml.org 
[lkml]   [2014]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/12] staging: comedi: amplc_pc236: remove manual configuration of PCI boards
Date
Remove the code that allows PCI boards to be manually attached by the
`COMEDI_DEVCONFIG` ioctl (or the "comedi_config" application).
Supported PCI boards (PCI236) will be attached automatically at probe
time via `comedi_pci_auto_config()` and the `auto_attach` hook in the
`struct comedi_driver`.

The "wildcard" entry in `pc236_boards[]` was only used when manually
attaching a PCI board using a driver name instead of a board name, so is
no longer needed. Remove it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/amplc_pc236.c | 72 ++++------------------------
1 file changed, 9 insertions(+), 63 deletions(-)

diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 7600319..7331ae3 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -21,19 +21,16 @@
* Driver: amplc_pc236
* Description: Amplicon PC36AT, PCI236
* Author: Ian Abbott <abbotti@mev.co.uk>
- * Devices: [Amplicon] PC36AT (pc36at), PCI236 (pci236 or amplc_pc236)
- * Updated: Wed, 01 Apr 2009 15:41:25 +0100
+ * Devices: [Amplicon] PC36AT (pc36at), PCI236 (pci236)
+ * Updated: Thu, 24 Jul 2014 14:25:26 +0000
* Status: works
*
* Configuration options - PC36AT:
* [0] - I/O port base address
* [1] - IRQ (optional)
*
- * Configuration options - PCI236:
- * [0] - PCI bus of device (optional)
- * [1] - PCI slot of device (optional)
- * If bus/slot is not specified, the first available PCI device will be
- * used.
+ * Manual configuration of PCI board (PCI236) is not supported; it is
+ * configured automatically.
*
* The PC36AT ISA board and PCI236 PCI board have a single 8255 appearing
* as subdevice 0.
@@ -85,7 +82,7 @@
*/

enum pc236_bustype { isa_bustype, pci_bustype };
-enum pc236_model { pc36at_model, pci236_model, anypci_model };
+enum pc236_model { pc36at_model, pci236_model };

struct pc236_board {
const char *name;
@@ -108,12 +105,6 @@ static const struct pc236_board pc236_boards[] = {
.bustype = pci_bustype,
.model = pci236_model,
},
- {
- .name = "amplc_pc236",
- .devid = PCI_DEVICE_ID_INVALID,
- .bustype = pci_bustype,
- .model = anypci_model, /* wildcard */
- },
#endif
};

@@ -149,49 +140,6 @@ static const struct pc236_board *pc236_find_pci_board(struct pci_dev *pci_dev)
}

/*
- * This function looks for a PCI device matching the requested board name,
- * bus and slot.
- */
-static struct pci_dev *pc236_find_pci_dev(struct comedi_device *dev,
- struct comedi_devconfig *it)
-{
- const struct pc236_board *thisboard = comedi_board(dev);
- struct pci_dev *pci_dev = NULL;
- int bus = it->options[0];
- int slot = it->options[1];
-
- for_each_pci_dev(pci_dev) {
- if (bus || slot) {
- if (bus != pci_dev->bus->number ||
- slot != PCI_SLOT(pci_dev->devfn))
- continue;
- }
- if (pci_dev->vendor != PCI_VENDOR_ID_AMPLICON)
- continue;
-
- if (thisboard->model == anypci_model) {
- /* Wildcard board matches any supported PCI board. */
- const struct pc236_board *foundboard;
-
- foundboard = pc236_find_pci_board(pci_dev);
- if (foundboard == NULL)
- continue;
- /* Replace wildcard board_ptr. */
- dev->board_ptr = foundboard;
- } else {
- /* Match specific model name. */
- if (pci_dev->device != thisboard->devid)
- continue;
- }
- return pci_dev;
- }
- dev_err(dev->class_dev,
- "No supported board found! (req. bus %d, slot %d)\n",
- bus, slot);
- return NULL;
-}
-
-/*
* This function is called to mark the interrupt as disabled (no command
* configured on subdevice 1) and to physically disable the interrupt
* (not possible on the PC36AT, except by removing the IRQ jumper!).
@@ -439,12 +387,10 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)

return pc236_common_attach(dev, dev->iobase, it->options[1], 0);
} else if (is_pci_board(thisboard)) {
- struct pci_dev *pci_dev;
-
- pci_dev = pc236_find_pci_dev(dev, it);
- if (!pci_dev)
- return -EIO;
- return pc236_pci_common_attach(dev, pci_dev);
+ dev_err(dev->class_dev,
+ "Manual configuration of PCI board '%s' is not supported\n",
+ thisboard->name);
+ return -EIO;
}

dev_err(dev->class_dev, "BUG! cannot determine board type!\n");
--
2.0.0


\
 
 \ /
  Last update: 2014-07-25 12:01    [W:0.116 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site