lkml.org 
[lkml]   [2014]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: mvebu: Added dts defintion for Lenovo Iomega ix4-300d NAS
Date
The Lenovo Iomega ix4-300d is a 4-Bay sata NAS with dual Gb,
USB2.0 & 3.0, powered by a Marvell Armada XP MV78230 dual core CPU.

http://shop.lenovo.com/fr/fr/servers/network-storage/lenovoemc/ix4-300d/
Signed-off-by: Benoit Masson <yahoo@perenite.com>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 284 ++++++++++++++++++++++++
2 files changed, 286 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index adb5ed9..4429495 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -437,8 +437,9 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-gp.dtb \
- armada-xp-netgear-rn2120.dtb \
+ armada-xp-lenovo-ix4-300d.dtb \
armada-xp-matrix.dtb \
+ armada-xp-netgear-rn2120.dtb \
armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
new file mode 100644
index 0000000..1f33cbc
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -0,0 +1,284 @@
+/*
+ * Device Tree file for Lenovo Iomega ix4-300d
+ *
+ * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+ model = "Lenovo Iomega ix4-300d";
+ compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
+ "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "/soc/internal-regs/serial@12000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x20000000>; /* 512MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* Quad port sata: Marvell 88SX7042 */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* USB 3.0 xHCI controller: NEC D720200F1 */
+ pcie@5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ pinctrl {
+ poweroff_pin: poweroff-pin {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ select_button_pin: select-button-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ scroll_button_pin: scroll-button-pin {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ hdd_led_pin: hdd-led-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@74000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ usb@50000 {
+ status = "okay";
+ };
+
+ usb@51000 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ compatible = "marvell,mv78230-a0-i2c",
+ "marvell,mv64xxx-i2c";
+ clock-frequency = <400000>;
+ status = "okay";
+
+ adt7473@2e {
+ compatible = "adi,adt7473";
+ reg = <0x2e>;
+ };
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0xe0000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "u-boot-env";
+ reg = <0xe0000 0x20000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env2";
+ reg = <0x100000 0x20000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "zImage";
+ reg = <0x120000 0x400000>;
+ };
+
+ partition@520000 {
+ label = "initrd";
+ reg = <0x520000 0x400000>;
+ };
+
+ partition@xE00000 {
+ label = "boot";
+ reg = <0xE00000 0x3F200000>;
+ };
+
+ partition@flash {
+ label = "flash";
+ reg = <0x0 0x40000000>;
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&power_button_pin &reset_button_pin
+ &select_button_pin &scroll_button_pin>;
+ pinctrl-names = "default";
+
+ power-button {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset-button {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+
+ select-button {
+ label = "Select Button";
+ linux,code = <BTN_SELECT>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ scroll-button {
+ label = "Scroll Button";
+ linux,code = <KEY_SCROLLDOWN>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi3 {
+ compatible = "spi-gpio";
+ status = "okay";
+ gpio-sck = <&gpio0 25 0>;
+ gpio-mosi = <&gpio1 15 0>; /*gpio 47*/
+ cs-gpios = <&gpio0 27 0 >;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio2: gpio2@0 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ registers-number = <2>;
+ spi-max-frequency = <100000>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&hdd_led_pin>;
+ pinctrl-names = "default";
+
+ hdd-led {
+ label = "ix4-300d:hdd:blue";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ power-led {
+ label = "ix4-300d:power:white";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ /* init blinking while booting */
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+
+ sysfail-led {
+ label = "ix4-300d:sysfail:red";
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ sys-led {
+ label = "ix4-300d:sys:blue";
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ hddfail-led {
+ label = "ix4-300d:hddfail:red";
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ };
+
+ /* Warning: you need both eth1 & 0 PHY initialized
+ (i.e having them up does the tweak)
+ for poweroff to shutdown otherwise it reboots */
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&poweroff_pin>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ };
+};
--
1.9.1


\
 
 \ /
  Last update: 2014-07-24 01:21    [W:0.055 / U:1.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site