lkml.org 
[lkml]   [2014]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 3/3] crypto: Add Allwinner Security System crypto accelerator
Date
On Wednesday, July 23, 2014 at 04:13:09 PM, Herbert Xu wrote:
> On Wed, Jul 23, 2014 at 04:07:20PM +0200, Marek Vasut wrote:
> > On Wednesday, July 23, 2014 at 03:57:35 PM, Herbert Xu wrote:
> > > On Sat, May 24, 2014 at 02:00:03PM +0200, Marek Vasut wrote:
> > > > > + }
> > > > > +#endif
> > > > > +
> > > > > +#ifdef CONFIG_CRYPTO_DEV_SUNXI_SS_MD5
> > > > > + err = crypto_register_shash(&sunxi_md5_alg);
> > > >
> > > > Do not use shash for such device. This is clearly and ahash (and
> > > > async in general) device. The rule of a thumb here is that you use
> > > > sync algos only for devices which have dedicated instructions for
> > > > computing the transformation. For devices which are attached to some
> > > > kind of bus, you use async algos (ahash etc).
> > >
> > > I'm sorry that I didn't catch this earlier but there is no such
> > > rule.
> > >
> > > Unless you need the async interface you should stick to the sync
> > > interfaces for the sake of simplicity.
> > >
> > > We have a number of existing drivers that are synchronous but
> > > using the async interface. They should either be converted
> > > over to the sync interface or made interrupt-driven if possible.
> >
> > Sure, but this device is interrupt driven and uses DMA to feed the crypto
> > engine, therefore async, right ?
>
> If it's interrupt-driven, then yes it would certainly make sense to
> be async. But all I see is polling in the latest posting, was the
> first version different?

I stand corrected then, sorry.

Is it possible to use DMA to feed the crypto accelerator, Corentin?

Best regards,
Marek Vasut


\
 
 \ /
  Last update: 2014-07-23 18:41    [W:0.330 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site