lkml.org 
[lkml]   [2014]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 17/25] clocksource: sirf: Fix incorrect clock enable counter for timer
Date
From: Zhiwu Song <Zhiwu.Song@csr.com>

In the clocksource driver, we didn't explicitly enable the clock. it makes the
clk reference counter wrong. We didn't encounter any hang issue because the
tick's clock input has been open and is shared by some other hardware
components, but if we don't enable those components in kernel, in the stage of
disabling unused clk in kernel boot, Linux tick hangs.

This patch fixes it. it does an explicit prepare and enable to the clock input,
and increases the usage counter of the clk.

Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/timer-marco.c | 3 +++
drivers/clocksource/timer-prima2.c | 3 +++
2 files changed, 6 insertions(+)

diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
index dbd3039..330e930 100644
--- a/drivers/clocksource/timer-marco.c
+++ b/drivers/clocksource/timer-marco.c
@@ -260,6 +260,9 @@ static void __init sirfsoc_marco_timer_init(struct device_node *np)

clk = of_clk_get(np, 0);
BUG_ON(IS_ERR(clk));
+
+ BUG_ON(clk_prepare_enable(clk));
+
rate = clk_get_rate(clk);

BUG_ON(rate < MARCO_CLOCK_FREQ);
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index a722aac..ce18d57 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -200,6 +200,9 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)

clk = of_clk_get(np, 0);
BUG_ON(IS_ERR(clk));
+
+ BUG_ON(clk_prepare_enable(clk));
+
rate = clk_get_rate(clk);

BUG_ON(rate < PRIMA2_CLOCK_FREQ);
--
1.7.9.5


\
 
 \ /
  Last update: 2014-07-23 13:41    [W:0.105 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site