lkml.org 
[lkml]   [2014]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/2] i2c: add DMA support for freescale i2c driver
Date
Add dma support for i2c. This function depend on DMA driver.
You can turn on it by write both the dmas and dma-name properties in dts node.

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
---
drivers/i2c/busses/i2c-imx.c | 377 +++++++++++++++++++++++++++++++++++++------
1 file changed, 324 insertions(+), 53 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 1d7efa3..a9893c3 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -37,22 +37,27 @@
/** Includes *******************************************************************
*******************************************************************************/

-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/interrupt.h>
-#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/init.h>
#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_dma.h>
#include <linux/platform_data/i2c-imx.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>

/** Defines ********************************************************************
*******************************************************************************/
@@ -63,6 +68,10 @@
/* Default value */
#define IMX_I2C_BIT_RATE 100000 /* 100kHz */

+/* enable DMA if transfer byte size is bigger than this threshold */
+#define IMX_I2C_DMA_THRESHOLD 16
+#define IMX_I2C_DMA_TIMEOUT 1000
+
/* IMX I2C registers:
* the I2C register offset is different between SoCs,
* to provid support for all these chips, split the
@@ -88,6 +97,7 @@
#define I2SR_IBB 0x20
#define I2SR_IAAS 0x40
#define I2SR_ICF 0x80
+#define I2CR_DMAEN 0x02
#define I2CR_RSTA 0x04
#define I2CR_TXAK 0x08
#define I2CR_MTX 0x10
@@ -174,6 +184,17 @@ struct imx_i2c_hwdata {
unsigned i2cr_ien_opcode;
};

+struct imx_i2c_dma {
+ struct dma_chan *chan_tx;
+ struct dma_chan *chan_rx;
+ struct dma_chan *chan_using;
+ struct completion cmd_complete;
+ dma_addr_t dma_buf;
+ unsigned int dma_len;
+ unsigned int dma_transfer_dir;
+ unsigned int dma_data_dir;
+};
+
struct imx_i2c_struct {
struct i2c_adapter adapter;
struct clk *clk;
@@ -184,6 +205,8 @@ struct imx_i2c_struct {
int stopped;
unsigned int ifdr; /* IMX_I2C_IFDR */
const struct imx_i2c_hwdata *hwdata;
+
+ struct imx_i2c_dma *dma;
};

static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
@@ -254,6 +277,133 @@ static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
}

+/* Functions for DMA support */
+static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
+ dma_addr_t phy_addr)
+{
+ struct imx_i2c_dma *dma;
+ struct dma_slave_config dma_sconfig;
+ struct device *dev = &i2c_imx->adapter.dev;
+ int ret;
+
+ dma = devm_kzalloc(dev, sizeof(struct imx_i2c_dma), GFP_KERNEL);
+ if (!dma) {
+ dev_info(dev, "can't allocate DMA struct\n");
+ return -ENOMEM;
+ }
+
+ dma->chan_tx = dma_request_slave_channel(dev, "tx");
+
+ if (!dma->chan_tx) {
+ dev_info(dev, "DMA tx channel request failed\n");
+ ret = -ENODEV;
+ goto fail_al;
+ }
+
+ dma_sconfig.dst_addr = phy_addr +
+ (IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
+ dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.dst_maxburst = 1;
+ dma_sconfig.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig);
+ if (ret < 0) {
+ dev_info(dev, "DMA slave config failed, err = %d\n", ret);
+ goto fail_tx;
+ }
+
+ dma->chan_rx = dma_request_slave_channel(dev, "rx");
+ if (!dma->chan_rx) {
+ dev_info(dev, "DMA rx channel request failed\n");
+ ret = -ENODEV;
+ goto fail_tx;
+ }
+
+ dma_sconfig.src_addr = phy_addr +
+ (IMX_I2C_I2DR << i2c_imx->hwdata->regshift);
+ dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.src_maxburst = 1;
+ dma_sconfig.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig);
+ if (ret < 0) {
+ dev_info(dev, "DMA slave config failed, err = %d\n", ret);
+ goto fail_rx;
+ }
+
+ i2c_imx->dma = dma;
+
+ init_completion(&dma->cmd_complete);
+
+ return 0;
+
+fail_rx:
+ dma_release_channel(dma->chan_rx);
+fail_tx:
+ dma_release_channel(dma->chan_tx);
+fail_al:
+ devm_kfree(dev, dma);
+
+ return ret;
+}
+
+static void i2c_imx_dma_callback(void *arg)
+{
+ struct imx_i2c_struct *i2c_imx = (struct imx_i2c_struct *)arg;
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+
+ dma_unmap_single(dma->chan_using->device->dev, dma->dma_buf,
+ dma->dma_len, dma->dma_data_dir);
+ complete(&dma->cmd_complete);
+}
+
+static int i2c_imx_dma_xfer(struct imx_i2c_struct *i2c_imx,
+ struct i2c_msg *msgs)
+{
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+ struct dma_async_tx_descriptor *txdesc;
+ struct device *dev = &i2c_imx->adapter.dev;
+ struct device *chan_dev = dma->chan_using->device->dev;
+
+ dma->dma_buf = dma_map_single(chan_dev, msgs->buf,
+ dma->dma_len, dma->dma_data_dir);
+ if (dma_mapping_error(chan_dev, dma->dma_buf)) {
+ dev_err(dev, "DMA mapping failed\n");
+ return -EINVAL;
+ }
+
+ txdesc = dmaengine_prep_slave_single(dma->chan_using, dma->dma_buf,
+ dma->dma_len, dma->dma_transfer_dir,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc) {
+ dev_err(dev, "Not able to get desc for DMA xfer\n");
+ dma_unmap_single(chan_dev, dma->dma_buf,
+ dma->dma_len, dma->dma_data_dir);
+ return -EINVAL;
+ }
+
+ txdesc->callback = i2c_imx_dma_callback;
+ txdesc->callback_param = i2c_imx;
+ dmaengine_submit(txdesc);
+ dma_async_issue_pending(dma->chan_using);
+
+ return 0;
+}
+
+static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
+{
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+
+ dma->dma_buf = 0;
+ dma->dma_len = 0;
+
+ dma_release_channel(dma->chan_tx);
+ dma->chan_tx = NULL;
+
+ dma_release_channel(dma->chan_rx);
+ dma->chan_rx = NULL;
+
+ dma->chan_using = NULL;
+}
+
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/

@@ -332,6 +482,11 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)

temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
return result;
}

@@ -425,44 +580,104 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)

static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
{
- int i, result;
+ int i, result, timeout = IMX_I2C_DMA_TIMEOUT;
+ unsigned int temp = 0;
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+ struct device *dev = &i2c_imx->adapter.dev;

- dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n",
+ dev_dbg(dev, "<%s> write slave address: addr=0x%x\n",
__func__, msgs->addr << 1);
+ if (dma && msgs->len >= IMX_I2C_DMA_THRESHOLD) {
+ reinit_completion(&i2c_imx->dma->cmd_complete);
+ dma->chan_using = dma->chan_tx;
+ dma->dma_transfer_dir = DMA_MEM_TO_DEV;
+ dma->dma_data_dir = DMA_TO_DEVICE;
+ dma->dma_len = msgs->len - 1;
+ result = i2c_imx_dma_xfer(i2c_imx, msgs);
+ if (result)
+ return result;

- /* write slave address */
- imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
- result = i2c_imx_trx_complete(i2c_imx);
- if (result)
- return result;
- result = i2c_imx_acked(i2c_imx);
- if (result)
- return result;
- dev_dbg(&i2c_imx->adapter.dev, "<%s> write data\n", __func__);
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);

- /* write data */
- for (i = 0; i < msgs->len; i++) {
- dev_dbg(&i2c_imx->adapter.dev,
- "<%s> write byte: B%d=0x%X\n",
- __func__, i, msgs->buf[i]);
- imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
+ /*
+ * Write slave address.
+ * The first byte muse be transmitted by the CPU.
+ */
+ imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+ result = wait_for_completion_interruptible_timeout(
+ &i2c_imx->dma->cmd_complete,
+ msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT));
+ if (result <= 0) {
+ dmaengine_terminate_all(dma->chan_using);
+ if (result)
+ return result;
+ else
+ return -ETIMEDOUT;
+ }
+
+ /* Waiting for Transfer complete. */
+ while (timeout--) {
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+ if (temp & I2SR_ICF)
+ break;
+ udelay(10);
+ }
+
+ if (!timeout)
+ return -ETIMEDOUT;
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ /* The last data byte must be transferred by the CPU. */
+ imx_i2c_write_reg(msgs->buf[msgs->len-1],
+ i2c_imx, IMX_I2C_I2DR);
result = i2c_imx_trx_complete(i2c_imx);
if (result)
return result;
+
result = i2c_imx_acked(i2c_imx);
if (result)
return result;
+ } else {
+ /* write slave address */
+ imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+
+ dev_dbg(dev, "<%s> write data\n", __func__);
+
+ /* write data */
+ for (i = 0; i < msgs->len; i++) {
+ dev_dbg(dev, "<%s> write byte: B%d=0x%X\n",
+ __func__, i, msgs->buf[i]);
+ imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+ result = i2c_imx_acked(i2c_imx);
+ if (result)
+ return result;
+ }
}
return 0;
}

static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
{
- int i, result;
+ int i, result, timeout = IMX_I2C_DMA_TIMEOUT;
unsigned int temp;
+ struct imx_i2c_dma *dma = i2c_imx->dma;
+ struct device *dev = &i2c_imx->adapter.dev;

- dev_dbg(&i2c_imx->adapter.dev,
- "<%s> write slave address: addr=0x%x\n",
+ dev_dbg(dev, "<%s> write slave address: addr=0x%x\n",
__func__, (msgs->addr << 1) | 0x01);

/* write slave address */
@@ -474,7 +689,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
if (result)
return result;

- dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
+ dev_dbg(dev, "<%s> setup bus\n", __func__);

/* setup bus to read data */
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
@@ -484,35 +699,82 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */

- dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
+ dev_dbg(dev, "<%s> read data\n", __func__);

- /* read data */
- for (i = 0; i < msgs->len; i++) {
- result = i2c_imx_trx_complete(i2c_imx);
+ if (dma && msgs->len >= IMX_I2C_DMA_THRESHOLD) {
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ reinit_completion(&i2c_imx->dma->cmd_complete);
+ dma->chan_using = dma->chan_rx;
+ dma->dma_transfer_dir = DMA_DEV_TO_MEM;
+ dma->dma_data_dir = DMA_FROM_DEVICE;
+ /* The last two data bytes must be transferred by the CPU. */
+ dma->dma_len = msgs->len - 2;
+ result = i2c_imx_dma_xfer(i2c_imx, msgs);
if (result)
return result;
- if (i == (msgs->len - 1)) {
- /* It must generate STOP before read I2DR to prevent
- controller from generating another clock cycle */
- dev_dbg(&i2c_imx->adapter.dev,
- "<%s> clear MSTA\n", __func__);
- temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
- temp &= ~(I2CR_MSTA | I2CR_MTX);
- imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
- i2c_imx_bus_busy(i2c_imx, 0);
- i2c_imx->stopped = 1;
- } else if (i == (msgs->len - 2)) {
- dev_dbg(&i2c_imx->adapter.dev,
- "<%s> set TXAK\n", __func__);
- temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
- temp |= I2CR_TXAK;
- imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ result = wait_for_completion_interruptible_timeout(
+ &i2c_imx->dma->cmd_complete,
+ msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT));
+ if (result <= 0) {
+ dmaengine_terminate_all(dma->chan_using);
+ if (result)
+ return result;
+ else
+ return -ETIMEDOUT;
}
- msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
- dev_dbg(&i2c_imx->adapter.dev,
- "<%s> read byte: B%d=0x%X\n",
- __func__, i, msgs->buf[i]);
+
+ /* waiting for Transfer complete. */
+ while (timeout--) {
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+ if (temp & I2SR_ICF)
+ break;
+ udelay(10);
+ }
+
+ if (!timeout)
+ return -ETIMEDOUT;
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~I2CR_DMAEN;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ } else {
+ /* read data */
+ for (i = 0; i < msgs->len - 2; i++) {
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+ msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+ dev_dbg(dev, "<%s> read byte: B%d=0x%X\n",
+ __func__, i, msgs->buf[i]);
+ }
+ result = i2c_imx_trx_complete(i2c_imx);
}
+
+ /* read n-1 byte data */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp |= I2CR_TXAK;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+
+ msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+ /* read n byte data */
+ result = i2c_imx_trx_complete(i2c_imx);
+ if (result)
+ return result;
+
+ /*
+ * It must generate STOP before read I2DR to prevent
+ * controller from generating another clock cycle
+ */
+ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+ temp &= ~(I2CR_MSTA | I2CR_MTX);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+ i2c_imx_bus_busy(i2c_imx, 0);
+ i2c_imx->stopped = 1;
+ msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+
return 0;
}

@@ -599,6 +861,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
void __iomem *base;
int irq, ret;
u32 bitrate;
+ u32 phy_addr;

dev_dbg(&pdev->dev, "<%s>\n", __func__);

@@ -609,6 +872,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
}

res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ phy_addr = res->start;
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
@@ -694,6 +958,10 @@ static int i2c_imx_probe(struct platform_device *pdev)
i2c_imx->adapter.name);
dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");

+ /* Init DMA config if support*/
+ if (i2c_imx_dma_request(i2c_imx, (dma_addr_t)phy_addr))
+ dev_warn(&pdev->dev, "can't request DMA\n");
+
return 0; /* Return OK */
}

@@ -705,6 +973,9 @@ static int i2c_imx_remove(struct platform_device *pdev)
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
i2c_del_adapter(&i2c_imx->adapter);

+ if (i2c_imx->dma)
+ i2c_imx_dma_free(i2c_imx);
+
/* setup chip registers to defaults */
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
--
1.8.4


\
 
 \ /
  Last update: 2014-07-23 12:21    [W:0.114 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site