lkml.org 
[lkml]   [2014]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 8/9] usb: phy: am335x: call usb_gen_phy_init()/usb_gen_phy_shutdown() in am335x_init()/am335x_shutdown()
On Tue, Jul 22, 2014 at 10:06:13AM +0200, Lothar Waßmann wrote:
> Hi,
>
> Felipe Balbi wrote:
> > Hi,,
> >
> > On Mon, Jul 21, 2014 at 10:03:07AM +0200, Lothar Waßmann wrote:
> > > Hi,
> > >
> > > > On Fri, Jul 18, 2014 at 11:31:29AM +0200, Lothar Waßmann wrote:
> > > > > This patch makes it possible to use the musb driver with HW that
> > > > > requires external regulators or clocks.
> > > >
> > > > can you provide an example of such HW ? Are you not using the internal
> > > > PHYs ?
> > > >
> > > The Ka-Ro electronics TX48 module uses the mmc0_clk pin as VBUSEN
> > > rathern than usb0_drvvbus. This patch makes it possible to use an
> > > external regulator to handle the VBUS switch through the 'vcc-supply'
> > > property of the underlying generic_phy device.
> >
> > OK, I get it now. But why would not use usb0_drvvbus ? You could still
> > route usb0_drvvbus to the regulator enable pin and the regulator would
> > be enabled for you once correct values are written to the IP's mailbox.
> >
> > I suppose this has something to do with layout constraints ?
> >
> Yes. The usb0_drvvbus is used for a different purpose.

alright, thanks for the info. I'll revisit this in a few days, quite
busy right now and my tree is closed for v3.17 anyway.

cheers

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-07-22 17:21    [W:0.365 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site