lkml.org 
[lkml]   [2014]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] ARM: tegra: roth: add display DT node
On 07/02/2014 09:10 PM, Alexandre Courbot wrote:
> On 07/03/2014 12:55 AM, Stephen Warren wrote:
>> On 07/02/2014 06:19 AM, Alexandre Courbot wrote:
>>> DSI support has been fixed to support continuous clock behavior that the
>>> panel used on SHIELD requires, so finally add its device tree node since
>>> it is functional.
>>
>>> diff --git a/arch/arm/boot/dts/tegra114-roth.dts
>>> b/arch/arm/boot/dts/tegra114-roth.dts
>>
>>> + host1x@50000000 {
>>> + dsi@54300000 {
>>
>> That node looks fine, but I wonder why we need to mark a bunch of
>> regulators as always-on? shouldn't the references to vdd-supply and
>> power-supply from this node be enough? If not, perhaps the tree
>> structure of the regulators isn't correct, or the DSI or panel bindings
>> don't allow enough regulators to be referenced?
>
> regulator-always-on is indeed not needed for vdd_lcd. I actually had a
> patch in my tree removing this line that I forgot to squash. Will post a
> v2 for this patch that fixes this, thanks.
>
> vdd-2v8-display needs to remain always-on however. Here we may hit a
> limitation of the simple-panel driver, where only one power supply can
> be provided.

Can't we fix the simple-panel driver to allow a list of regulators in
the property?

I suppose that this technique is OK though; we can always simplify the
DT later if the simple-panel binding gets enhanced.


\
 
 \ /
  Last update: 2014-07-21 18:21    [W:1.356 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site