lkml.org 
[lkml]   [2014]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv6 3/4] iio: devicetree: Add DT binding documentation for Exynos3250 ADC
On 07/19/2014 03:48 AM, Arnd Bergmann wrote:
> On Saturday 19 July 2014 02:02:09 Chanwoo Choi wrote:
>> On Sat, Jul 19, 2014 at 1:33 AM, Arnd Bergmann <arnd@arndb.de> wrote:
>>> On Saturday 19 July 2014 01:23:15 Chanwoo Choi wrote:
>>>> If don't add new compatible including specific exynos version,
>>>> I would add new 'adc-needs-sclk' property with existing 'exynos-adc-v2'
>>>> compatible name.
>
> What I actually meant is using compatible="exynos-adc-v2.1" or similar
> rather than "exynos3250-adc". However, as you already explained, the
> version numbers are apparently just made up, so using "exynos3250-adc"
> is actually better here. If a future exynos7890 uses the same clocks
> as exynos3250, it can simply use the same "exynos3250-adc" string here.

OK, I'll use "exynos3250-adc" compatible string instead of "exynos3250-adc-v2".

>
>>>> Dear Naveen, Tomasz,
>>>>
>>>> If existing exynos-adc driver add just one property for 'sclk_adc'
>>>> as following, exynos-adc could not include the exynos version
>>>> in compatible name.
>>>>
>>>> I need your opinion about it.
>>>>
>>>> adc: adc@126C0000 {
>>>> compatible = "samsung,exynos-adc-v2";
>>>> reg = <0x126C0000 0x100>, <0x10020718 0x4>;
>>>> interrupts = <0 137 0>;
>>>> clock-names = "adc", "sclk_adc";
>>>> clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
>>>> + adc-needs-sclk;
>>>> #io-channel-cells = <1>;
>>>> io-channel-ranges;
>>>> }
>>>
>>> How about just making it an optional clock? That would be much
>>> easier because then you can simply see if the clock itself is
>>> there and use it, or otherwise ignore it.
>>
>> The v1 of this patchset[1] got the clock of 'sclk_adc' but if the dt node
>> of ADC in dtsi file didn't include 'sclk_adc', print just warning message
>> without stopping probe as following:
>>
>> [1] https://lkml.org/lkml/2014/4/10/710
>>
>> + info->sclk = devm_clk_get(&pdev->dev, "sclk_adc");
>> + if (IS_ERR(info->sclk)) {
>> + dev_warn(&pdev->dev, "failed getting sclk clock, err = %ld\n",
>> + PTR_ERR(info->sclk));
>> + info->sclk = NULL;
>> + }
>>
>> But, Tomasz Figa suggested the method[2] of this patchset(v6).
>> [2] https://lkml.org/lkml/2014/4/11/189
>
> Yes, your current version is certainly better than this, but another way
> to address Tomasz' comment would be to change the binding to list the "sclk"
> as optional for any device and make the code silently ignore missing sclk
> entries, like:
>
>
> info->sclk = devm_clk_get(&pdev->dev, "sclk");
> if (IS_ERR(info->sclk)) {
> switch (PTR_ERR(info->sclk)) {
> case -EPROBE_DEFER:
> /* silently return error so we can retry */
> return -EPROBE_DEFER:
> case -ENOENT:
> /* silently ignore missing optional clk */
> info->sclk = NULL;
> break;
> default:
> /* any other error: clk is defined by doesn't work */
> dev_err(&pdev->dev, "failed getting sclk clock, err = %ld\n",
> PTR_ERR(info->sclk));
> return PTR_ERR(info->sclk));
> }
> }

I tested this patch suggested by you.
But, devm_clk_get returns always '-ENOENT' on follwong two cases:

Case 1.
ADC dt node in exynos3250.dtsi don't include 'sclk' clock as following:

adc: adc@126C0000 {
compatible = "samsung,exynos3250-adc";
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
interrupts = <0 137 0>;
clock-names = "adc";
clocks = <&cmu CLK_TSADC>;
#io-channel-cells = <1>;
io-channel-ranges;
};

Case 2.
ADC dt node in exynos3250.dtsi don't include 'sclk' clock
but, exynos3250 clock controller don't support CLK_SCLK_TSADC clock as following:

adc: adc@126C0000 {
compatible = "samsung,exynos3250-adc";
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
interrupts = <0 137 0>;
clock-names = "adc", "sclk";
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
#io-channel-cells = <1>;
io-channel-ranges;
};


So, I think exynos-adc needs to use 'needs_sclk' field suggested by Tomasz Figa.

>
> One more comment about the name: Both in the code you use "sclk" as the
> name, so presumably that is the actual name of the clk as known to this
> driver, and it makes sense to use clock-names="sclk" as well, if you want
> to have any name.

OK, I'll use 'sclk' clock name for special clock of ADC.

Thanks,
Chanwoo Choi


\
 
 \ /
  Last update: 2014-07-21 04:41    [W:0.504 / U:1.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site