lkml.org 
[lkml]   [2014]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] omap: phy: dra7-evm PHY fixes for 3.16
Date
Hi,

On DRA7-evm, the VDDA_1V8_PHY supply must be always-on for proper functioning
of the PHYs on the SoC.

The 3.3V USB supply (ldousb_reg) can be turned OFF when the High Speed USB PHYs
are not in use. We add regulator support in the PHY framework core to manage
the PHY's regulator during PHY power on/off.

Finally we add the 3.3V regulator information to the USB2 PHYs.

This series should get the USB and SATA working again on 3.16 on DRA7-evm.

cheers,
-roger

---
Roger Quadros (6):
ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on
phy: core: Fix error path in phy_create()
phy: core: Support regulator supply for PHY power
phy: core: Add phy-supply to DT binding documentation
phy: omap-usb2: Balance pm_runtime_enable() on probe failure
ARM: dts: dra7-evm: Add regulator information to USB2 PHYs

.../devicetree/bindings/phy/phy-bindings.txt | 4 +++
arch/arm/boot/dts/dra7-evm.dts | 9 +++++
drivers/phy/phy-core.c | 39 ++++++++++++++++++++--
drivers/phy/phy-omap-usb2.c | 8 +++--
include/linux/phy/phy.h | 2 ++
5 files changed, 57 insertions(+), 5 deletions(-)

--
1.8.3.2



\
 
 \ /
  Last update: 2014-07-02 14:41    [W:0.112 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site