Messages in this thread | | | Date | Fri, 18 Jul 2014 12:26:45 +0200 | From | Hans de Goede <> | Subject | Re: [PATCH v5 1/8] of: Add NVIDIA Tegra SATA controller binding |
| |
Hi,
On 07/18/2014 09:11 AM, Mikko Perttunen wrote: > This patch adds device tree binding documentation for the SATA > controller found on NVIDIA Tegra SoCs. > > Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> > --- > v5: remove ordering requirement again
Acked-by: Hans de Goede <hdegoede@redhat.com>
Regards,
Hans
> > .../devicetree/bindings/ata/tegra-sata.txt | 30 ++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/ata/tegra-sata.txt > > diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/tegra-sata.txt > new file mode 100644 > index 0000000..946f207 > --- /dev/null > +++ b/Documentation/devicetree/bindings/ata/tegra-sata.txt > @@ -0,0 +1,30 @@ > +Tegra124 SoC SATA AHCI controller > + > +Required properties : > +- compatible : "nvidia,tegra124-ahci". > +- reg : Should contain 2 entries: > + - AHCI register set (SATA BAR5) > + - SATA register set > +- interrupts : Defines the interrupt used by SATA > +- clocks : Must contain an entry for each entry in clock-names. > + See ../clocks/clock-bindings.txt for details. > +- clock-names : Must include the following entries: > + - sata > + - sata-oob > + - cml1 > + - pll_e > +- resets : Must contain an entry for each entry in reset-names. > + See ../reset/reset.txt for details. > +- reset-names : Must include the following entries: > + - sata > + - sata-oob > + - sata-cold > +- phys : Must contain an entry for each entry in phy-names. > + See ../phy/phy-bindings.txt for details. > +- phy-names : Must include the following entries: > + - sata-phy : XUSB PADCTL SATA PHY > +- hvdd-supply : Defines the SATA HVDD regulator > +- vddio-supply : Defines the SATA VDDIO regulator > +- avdd-supply : Defines the SATA AVDD regulator > +- target-5v-supply : Defines the SATA 5V power regulator > +- target-12v-supply : Defines the SATA 12V power regulator >
| |