lkml.org 
[lkml]   [2014]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 11/19] ARM: S5PV210: Remove support for board files
From
Date
On Fri, 2014-07-04 at 19:48 +0200, Tomasz Figa wrote:
> Since all in-tree boards have been moved to device tree, we can now drop
> legacy code and make mach-s5pv210 DT-only. This patch does it.
>
> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
> ---

This patch showed up in next-20140716 too.

>[...]
> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
> index ed492cf..d6d0f92 100644
> --- a/arch/arm/mach-s5pv210/Kconfig
> +++ b/arch/arm/mach-s5pv210/Kconfig
> @@ -19,181 +19,8 @@ config CPU_S5PV210
> help
> Enable S5PV210 CPU support
>
> -config S5PV210_SETUP_I2C1
> - bool
> - help
> - Common setup code for i2c bus 1.
> -
> -config S5PV210_SETUP_I2C2
> - bool
> - help
> - Common setup code for i2c bus 2.
> -
> -config S5PV210_SETUP_IDE
> - bool
> - help
> - Common setup code for S5PV210 IDE GPIO configurations
> -
> -config S5PV210_SETUP_FB_24BPP
> - bool
> - help
> - Common setup code for S5PV210 with an 24bpp RGB display helper.
> -
> -config S5PV210_SETUP_KEYPAD
> - bool
> - help
> - Common setup code for keypad.
> -
> -config S5PV210_SETUP_SDHCI
> - bool
> - select S5PV210_SETUP_SDHCI_GPIO
> - help
> - Internal helper functions for S5PV210 based SDHCI systems
> -
> -config S5PV210_SETUP_SDHCI_GPIO
> - bool
> - help
> - Common setup code for SDHCI gpio.
> -
> -config S5PV210_SETUP_FIMC
> - bool
> - help
> - Common setup code for the camera interfaces.
> -
> -config S5PV210_SETUP_SPI
> - bool
> - help
> - Common setup code for SPI GPIO configurations.
> -
> -config S5PV210_SETUP_USB_PHY
> - bool
> - help
> - Common setup code for USB PHY controller
> -
> -menu "S5PC110 Machines"
> -
> -config MACH_AQUILA
> - bool "Aquila"
> - select CPU_S5PV210
> - select S3C_DEV_FB
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC1
> - select S3C_DEV_HSMMC2
> - select S5PV210_SETUP_FB_24BPP
> - select S5PV210_SETUP_SDHCI
> - select S5PV210_SETUP_USB_PHY
> - select S5P_DEV_FIMC0
> - select S5P_DEV_FIMC1
> - select S5P_DEV_FIMC2
> - select S5P_DEV_ONENAND
> - help
> - Machine support for the Samsung Aquila target based on S5PC110 SoC
> -

This symbol is still referenced in sound/soc/samsung/Kconfig.

> -config MACH_GONI
> - bool "GONI"
> - select CPU_S5PV210
> - select S3C_DEV_FB
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC1
> - select S3C_DEV_HSMMC2
> - select S3C_DEV_I2C1
> - select S3C_DEV_I2C2
> - select S3C_DEV_USB_HSOTG
> - select S5PV210_SETUP_FB_24BPP
> - select S5PV210_SETUP_FIMC
> - select S5PV210_SETUP_I2C1
> - select S5PV210_SETUP_I2C2
> - select S5PV210_SETUP_KEYPAD
> - select S5PV210_SETUP_SDHCI
> - select S5PV210_SETUP_USB_PHY
> - select S5P_DEV_FIMC0
> - select S5P_DEV_FIMC1
> - select S5P_DEV_FIMC2
> - select S5P_DEV_MFC
> - select S5P_DEV_ONENAND
> - select S5P_DEV_TV
> - select S5P_GPIO_INT
> - select SAMSUNG_DEV_KEYPAD
> - help
> - Machine support for Samsung GONI board
> - S5PC110(MCP) is one of package option of S5PV210

Ditto.

> -config MACH_SMDKC110
> - bool "SMDKC110"
> - select CPU_S5PV210
> - select S3C_DEV_I2C1
> - select S3C_DEV_I2C2
> - select S3C_DEV_RTC
> - select S3C_DEV_WDT
> - select S5PV210_SETUP_I2C1
> - select S5PV210_SETUP_I2C2
> - select S5PV210_SETUP_IDE
> - select S5P_DEV_FIMC0
> - select S5P_DEV_FIMC1
> - select S5P_DEV_FIMC2
> - select S5P_DEV_MFC
> - select SAMSUNG_DEV_IDE
> - help
> - Machine support for Samsung SMDKC110
> - S5PC110(MCP) is one of package option of S5PV210

Ditto.

> -endmenu
> -
> menu "S5PV210 Machines"
>
> -config MACH_SMDKV210
> - bool "SMDKV210"
> - select CPU_S5PV210
> - select S3C_DEV_FB
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC1
> - select S3C_DEV_HSMMC2
> - select S3C_DEV_HSMMC3
> - select S3C_DEV_I2C1
> - select S3C_DEV_I2C2
> - select S3C_DEV_RTC
> - select S3C_DEV_USB_HSOTG
> - select S3C_DEV_WDT
> - select S5PV210_SETUP_FB_24BPP
> - select S5PV210_SETUP_I2C1
> - select S5PV210_SETUP_I2C2
> - select S5PV210_SETUP_IDE
> - select S5PV210_SETUP_KEYPAD
> - select S5PV210_SETUP_SDHCI
> - select S5PV210_SETUP_USB_PHY
> - select S5P_DEV_FIMC0
> - select S5P_DEV_FIMC1
> - select S5P_DEV_FIMC2
> - select S5P_DEV_JPEG
> - select S5P_DEV_MFC
> - select SAMSUNG_DEV_ADC
> - select SAMSUNG_DEV_BACKLIGHT
> - select SAMSUNG_DEV_IDE
> - select SAMSUNG_DEV_KEYPAD
> - select SAMSUNG_DEV_PWM
> - select SAMSUNG_DEV_TS
> - help
> - Machine support for Samsung SMDKV210
> -

Ditto.

> -config MACH_TORBRECK
> - bool "Torbreck"
> - select ARCH_SPARSEMEM_ENABLE
> - select CPU_S5PV210
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC1
> - select S3C_DEV_HSMMC2
> - select S3C_DEV_HSMMC3
> - select S3C_DEV_I2C1
> - select S3C_DEV_I2C2
> - select S3C_DEV_RTC
> - select S3C_DEV_WDT
> - select S5PV210_SETUP_I2C1
> - select S5PV210_SETUP_I2C2
> - select S5PV210_SETUP_SDHCI
> - select SAMSUNG_DEV_IDE
> - help
> - Machine support for aESOP Torbreck
> -
> config MACH_S5PV210_DT
> bool "Samsung S5PV210/S5PC110 machine using Device Tree"
> select CLKSRC_OF

I assume one or more patches to remove the references to these symbols
in sound/soc/samsung/Kconfig are pending. Is that correct?


Paul Bolle



\
 
 \ /
  Last update: 2014-07-19 23:41    [W:0.147 / U:2.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site