lkml.org 
[lkml]   [2014]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 13/19] ARM: s5pv210: move debug-macro.S into the common space
On 07/05/14 02:48, Tomasz Figa wrote:
> Move debug-macro.S from mach/include to include/debug where
> all other common debug macros are.
>
> Signed-off-by: Tomasz Figa<t.figa@samsung.com>
> ---
> arch/arm/Kconfig.debug | 12 +++++--
> arch/arm/include/debug/s5pv210.S | 34 ++++++++++++++++++++
> arch/arm/mach-s5pv210/include/mach/debug-macro.S | 41 ------------------------
> 3 files changed, 44 insertions(+), 43 deletions(-)
> create mode 100644 arch/arm/include/debug/s5pv210.S
> delete mode 100644 arch/arm/mach-s5pv210/include/mach/debug-macro.S
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 8f90595..c2bcfcf 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -617,6 +617,7 @@ choice
> depends on PLAT_SAMSUNG
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> + select DEBUG_S5PV210_UART if ARCH_S5PV210
> bool "Use S3C UART 0 for low-level debug"
> help
> Say Y here if you want the debug print routines to direct
> @@ -630,6 +631,7 @@ choice
> depends on PLAT_SAMSUNG
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> + select DEBUG_S5PV210_UART if ARCH_S5PV210
> bool "Use S3C UART 1 for low-level debug"
> help
> Say Y here if you want the debug print routines to direct
> @@ -643,6 +645,7 @@ choice
> depends on PLAT_SAMSUNG
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> + select DEBUG_S5PV210_UART if ARCH_S5PV210
> bool "Use S3C UART 2 for low-level debug"
> help
> Say Y here if you want the debug print routines to direct
> @@ -653,8 +656,9 @@ choice
> by CONFIG_S3C_LOWLEVEL_UART_PORT.
>
> config DEBUG_S3C_UART3
> - depends on PLAT_SAMSUNG&& ARCH_EXYNOS
> - select DEBUG_EXYNOS_UART
> + depends on PLAT_SAMSUNG&& (ARCH_EXYNOS || ARCH_S5PV210)
> + select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> + select DEBUG_S5PV210_UART if ARCH_S5PV210
> bool "Use S3C UART 3 for low-level debug"
> help
> Say Y here if you want the debug print routines to direct
> @@ -949,6 +953,9 @@ config DEBUG_S3C2410_UART
> config DEBUG_S3C24XX_UART
> bool
>
> +config DEBUG_S5PV210_UART
> + bool
> +
> config DEBUG_OMAP2PLUS_UART
> bool
> depends on ARCH_OMAP2PLUS
> @@ -1009,6 +1016,7 @@ config DEBUG_LL_INCLUDE
> default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
> default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
> default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
> + default "debug/s5pv210.S" if DEBUG_S5PV210_UART
> default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
> default "debug/sti.S" if DEBUG_STI_UART
> default "debug/tegra.S" if DEBUG_TEGRA_UART
> diff --git a/arch/arm/include/debug/s5pv210.S b/arch/arm/include/debug/s5pv210.S
> new file mode 100644
> index 0000000..4f1a73e
> --- /dev/null
> +++ b/arch/arm/include/debug/s5pv210.S
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/* pull in the relevant register and map files. */
> +
> +#define S3C_ADDR_BASE 0xF6000000
> +#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000
> +#define S5PV210_PA_UART 0xe2900000
> +
> + /* note, for the boot process to work we have to keep the UART
> + * virtual address aligned to an 1MiB boundary for the L1
> + * mapping the head code makes. We keep the UART virtual address
> + * aligned and add in the offset when we load the value here.
> + */
> +
> + .macro addruart, rp, rv, tmp
> + ldr \rp, =S5PV210_PA_UART
> + ldr \rv, =S3C_VA_UART
> +#if CONFIG_DEBUG_S3C_UART != 0
> + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
> + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
> +#endif
> + .endm
> +
> +#define fifo_full fifo_full_s5pv210
> +#define fifo_level fifo_level_s5pv210
> +
> +#include<debug/samsung.S>
> diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
> deleted file mode 100644
> index 30b511a..0000000

Tomasz,

I couldn't apply this one from this your series because of conflict with
others. Can you please respin this one?

Thanks,
-Kukjin


\
 
 \ /
  Last update: 2014-07-16 03:41    [W:0.196 / U:4.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site