lkml.org 
[lkml]   [2014]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 01/11] ARM: stih407: Add DT nodes for for PWM
    Date
    Supply top level nodes for the STiH407 based development boards.
    The Pinctrl configuration has already been applied, so the only
    missing piece of the DT puzzle is for a board's DTB to enable
    the nodes.

    Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com>
    Signed-off-by: Lee Jones <lee.jones@linaro.org>
    ---
    arch/arm/boot/dts/stih407.dtsi | 28 ++++++++++++++++++++++++++++
    1 file changed, 28 insertions(+)

    diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
    index 4f9024f..dc58b34 100644
    --- a/arch/arm/boot/dts/stih407.dtsi
    +++ b/arch/arm/boot/dts/stih407.dtsi
    @@ -259,5 +259,33 @@

    status = "disabled";
    };
    +
    + /* COMMS PWM Module */
    + pwm0: pwm@9810000 {
    + compatible = "st,sti-pwm";
    + status = "disabled";
    + #pwm-cells = <2>;
    + reg = <0x9810000 0x68>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
    + clock-names = "pwm";
    + clocks = <&clk_sysin>;
    + };
    +
    + /* SBC PWM Module */
    + pwm1: pwm@9510000 {
    + compatible = "st,sti-pwm";
    + status = "disabled";
    + #pwm-cells = <2>;
    + reg = <0x9510000 0x68>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&pinctrl_pwm1_chan0_default
    + &pinctrl_pwm1_chan1_default
    + &pinctrl_pwm1_chan2_default
    + &pinctrl_pwm1_chan3_default>;
    + clock-names = "pwm";
    + clocks = <&clk_sysin>;
    + st,pwm-num-chan = <4>;
    + };
    };
    };
    --
    1.8.3.2


    \
     
     \ /
      Last update: 2014-07-14 17:21    [W:4.049 / U:0.144 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site