lkml.org 
[lkml]   [2014]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/4] Fine tune USB 3.0 PHY on exynos5420
Date
This series is based on Heikki's patches for simpliefied phy lookup table:
[PATCHv2 0/6] phy: simplified phy lookup [1], applied against 'next' branch
of Kishon's linux-phy tree.

Changes since v2:
1) Removed any check for DWC3 in xhci-plat for getting usb2-phy and usb3-phy,
in order to make it more generic.
2) Moved the phy_calibration calls to core/hcd.c to enable a more generic
solution for issues of calibrating the PHYs.

Changes since v1:
1) Using 'gen_phy' member of 'hcd' instead of declaring more variables
to hold phys.
2) Added a check for compatible match for 'Synopsys-dwc3' controller,
since the 'gen_phy' member of 'hcd' already gets the 'usb' PHY
in core/hcd.c; but XHCI on Synopsys-dwc3 doesn't need that,
instead two separate PHYs for UTMI+ and PIPE3 for the two HCDs
(main hcd and shared hcd).
3) Restructured the code in 'xhci_plat_setup()' and 'xhci_plat_resume()'
to use hcd->gen_phy directly. Also added the check for Synopsys's DWC3
controller while trying to calibrate the PHY.

Explanation for the need of this patch-series:
"The DWC3-exynos eXtensible host controller present on Exynos5420/5800
SoCs is quirky. The PHY serving this controller operates at High-Speed
by default, so it detects even Super-speed devices as high-speed ones.
Certain PHY parameters like Tx LOS levels and Boost levels need to be
calibrated further post initialization of xHCI controller, to get
SuperSpeed operations working."

[1] https://lkml.org/lkml/2014/6/5/358

Vivek Gautam (4):
phy: Add provision for calibrating phy.
usb: host: xhci-plat: Get PHYs for xhci's hcds
usb: hcd: Caibrate PHY post hcd reset
phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800

drivers/phy/phy-core.c | 36 ++++++++
drivers/phy/phy-exynos5-usbdrd.c | 169 ++++++++++++++++++++++++++++++++++++++
drivers/usb/core/hcd.c | 22 +++++
drivers/usb/host/xhci-plat.c | 17 ++++
include/linux/phy/phy.h | 8 ++
5 files changed, 252 insertions(+)

--
1.7.10.4



\
 
 \ /
  Last update: 2014-07-14 15:41    [W:0.644 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site