lkml.org 
[lkml]   [2014]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/2] phy: qcom: Update APQ8064 PHY device tree bindings
Date
Add binding spec for Qualcomm SoC PHYs, starting with the SATA PHY on
the APQ8064 family of SoCs

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
Documentation/devicetree/bindings/phy/qcom-phy.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom-phy.txt b/Documentation/devicetree/bindings/phy/qcom-phy.txt
index 76bfbd0..6bff1e0 100644
--- a/Documentation/devicetree/bindings/phy/qcom-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-phy.txt
@@ -1,4 +1,4 @@
-Qualcomm IPQ806x SATA PHY Controller
+Qualcomm IPQ806x/APQ8064 SATA PHY Controller
------------------------------------

SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
@@ -6,6 +6,7 @@ Each SATA PHY controller should have its own node.

Required properties:
- compatible: compatible list, contains "qcom,ipq806x-sata-phy"
+ or "qcom,apq8064-sata-phy".
- reg: offset and length of the SATA PHY register set;
- #phy-cells: must be zero
- clocks: must be exactly one entry
--
1.9.1


\
 
 \ /
  Last update: 2014-07-14 11:41    [W:1.680 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site