lkml.org 
[lkml]   [2014]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] serial: 8250_dw: support high baudrates if possible
On Tue, Jul 01, 2014 at 10:15:34AM -0500, Alex Elder wrote:
> Currently the Synopsys DesignWare 8250 driver assumes its UART clock
> runs at a fixed rate. If a "real" clock was set up using the common
> clock framework, and that clock's rate is adjustable, it may be
> possible to support a wider range of baud rates by changing the
> UART clock rate.
>
> This is done by setting up a uart_port->set_termios method that
> requests a clock rate change if a different rate might make it
> more likely to achieve a specified baud. A new function
> dw8250_adjustable_clk() determines whether such clock rate
> adjustment is an option.
>
> Signed-off-by: Alex Elder <elder@linaro.org>
> ---
> v2: Limit clock changing to specific compatible devices.
>
> drivers/tty/serial/8250/8250_dw.c | 57 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 57 insertions(+)

This no longer applies due to other changes in this driver. Can you
please refresh it against my tty-next branch of the tty.git tree and
resend?

thanks,

greg k-h


\
 
 \ /
  Last update: 2014-07-11 02:01    [W:0.050 / U:0.800 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site