lkml.org 
[lkml]   [2014]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] x86,cpu-hotplug: assign same CPU number to readded CPU
On Thu, 10 Jul 2014 17:41:50 +0900
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> wrote:

> llc_shared_map is not cleared even if CPU is offline or hot removed.
> So when hot-plugging CPU and assigning new CPU number to hot-added CPU,
> the mask has wrong value. The mask is used by CSF schduler to create
> sched_domain. So it breaks CFS scheduler.
>
> Here is a example on my system.
> My system has 4 sockets and each socket has 15 cores and HT is enabled.
> In this case, each core of sockes is numbered as follows:
>
> | CPU#
> Socket#0 | 0-14 , 60-74
> Socket#1 | 15-29, 75-89
> Socket#2 | 30-44, 90-104
> Socket#3 | 45-59, 105-119
>
> Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000.
> It means that last level cache of Socket#2 is shared with
> CPU#30-44 and 90-104.
>
> When hot-removing socket#2 and #3, each core of sockets is numbered
> as follows:
>
> | CPU#
> Socket#0 | 0-14 , 60-74
> Socket#1 | 15-29, 75-89
>
> But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30 remains
> having 0x3fff80000001fffc0000000.
>
> After that, when hot-adding socket#2 and #3, each core of sockets is
> numbered as follows:
>
> | CPU#
> Socket#0 | 0-14 , 60-74
> Socket#1 | 15-29, 75-89
> Socket#2 | 30-59
> Socket#3 | 90-119
>
> Then llc_shared_mask of CPU#30 becomes 0x3fff8000fffffffc0000000.
> It means that last level cache of Socket#2 is shared with CPU#30-59
> and 90-104. So the mask has wrong value.
>
> At first, I cleared hot-removed CPU number's bit from llc_shared_map
> when hot removing CPU. But Borislav suggested that the problem will
> disappear if readded CPU is assigned same CPU number. And llc_shared_map
> must not be changed.
>
> So the patch assigns same CPU number to readded CPU by linking CPU
> number to APIC ID. And by the patch, the problem disappers.
>
> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
> Suggested-by: Borislav Petkov <bp@alien8.de1>
> ---
> arch/x86/kernel/apic/apic.c | 32 +++++++++++++++++++++++++++++++-
> 1 file changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
> index ad28db7..1cc715b 100644
> --- a/arch/x86/kernel/apic/apic.c
> +++ b/arch/x86/kernel/apic/apic.c
> @@ -220,6 +220,22 @@ static void apic_pm_activate(void);
> static unsigned long apic_phys;
>
> /*
> + * Bind ACPI ID to CPU ID
> + * CPU ID to APIC ID does not change by this array even if CPU is
> + * hotplugged. So don't clear the array even if CPU is hot-removed
> + */
> +static int apicid_to_cpuid[MAX_LOCAL_APIC] = {
> + [0 ... MAX_LOCAL_APIC-1] = -1,
> +};
> +
> +/*
> + * Represent CPU ID bound to APIC
> + * Don't clear a bit even if CPU is hot-removed
> + */
> +static DECLARE_BITMAP(cpu_used_bits, CONFIG_NR_CPUS);
> +static struct cpumask *const cpu_used_mask = to_cpumask(cpu_used_bits);
> +
> +/*
> * Get the LAPIC version
> */
> static inline int lapic_get_version(void)
> @@ -2122,6 +2138,17 @@ void disconnect_bsp_APIC(int virt_wire_setup)
> apic_write(APIC_LVT1, value);
> }
>
> +static int get_cpuid(int apicid)
> +{
> + int cpuid;
> +
> + cpuid = apicid_to_cpuid[apicid];
> + if (cpuid < 0)
> + cpuid = cpumask_next_zero(-1, cpu_used_mask);
Why do you need additional cpu bitmask?
How about just finding the first apicid_to_cpuid[apicid] < 0
and dropping not needed anymore bitmask.

> +
> + return cpuid;
> +}
> +
> int generic_processor_info(int apicid, int version)
> {
> int cpu, max = nr_cpu_ids;
> @@ -2199,7 +2226,9 @@ int generic_processor_info(int apicid, int version)
> */
> cpu = 0;
> } else
> - cpu = cpumask_next_zero(-1, cpu_present_mask);
> + cpu = get_cpuid(apicid);
> +
> + apicid_to_cpuid[apicid] = cpu;
>
> /*
> * Validate version
> @@ -2228,6 +2257,7 @@ int generic_processor_info(int apicid, int version)
> early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
> apic->x86_32_early_logical_apicid(cpu);
> #endif
> + cpumask_set_cpu(cpu, cpu_used_mask);
> set_cpu_possible(cpu, true);
> set_cpu_present(cpu, true);
>
>



\
 
 \ /
  Last update: 2014-07-10 12:01    [W:0.061 / U:0.684 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site