lkml.org 
[lkml]   [2014]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/14] cpufreq: cpu0: try regulators with name "cpu-supply"
Date
Currently, we expect regulator name to be "cpu0", but as we are going to support
multiple cpu-blocks (all CPUs in a block share clock/voltage) later, we need to
pass some generic string instead of that.

For backwards compatibility try for "cpu0" first and if it fails, then try for
"cpu".

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/cpufreq/cpufreq-cpu0.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 15b8e7a..17001a8 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -113,6 +113,7 @@ static int allocate_resources(struct device **cdev,
struct regulator *cpu_reg;
struct clk *cpu_clk;
int ret = 0;
+ char *reg_cpu0 = "cpu0", *reg_cpu = "cpu", *reg;

cpu_dev = get_cpu_device(0);
if (!cpu_dev) {
@@ -120,7 +121,11 @@ static int allocate_resources(struct device **cdev,
return -ENODEV;
}

- cpu_reg = regulator_get_optional(cpu_dev, "cpu0");
+ /* Try "cpu0" for older DTs */
+ reg = reg_cpu0;
+
+try_again:
+ cpu_reg = regulator_get_optional(cpu_dev, reg);
if (IS_ERR(cpu_reg)) {
/*
* If cpu0 regulator supply node is present, but regulator is
@@ -130,6 +135,13 @@ static int allocate_resources(struct device **cdev,
dev_err(cpu_dev, "cpu0 regulator not ready, retry\n");
return -EPROBE_DEFER;
}
+
+ /* Try with "cpu-supply" */
+ if (reg == reg_cpu0) {
+ reg = reg_cpu;
+ goto try_again;
+ }
+
dev_warn(cpu_dev, "failed to get cpu0 regulator: %ld\n",
PTR_ERR(cpu_reg));
}
--
2.0.0.rc2


\
 
 \ /
  Last update: 2014-07-01 23:41    [W:0.312 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site