lkml.org 
[lkml]   [2014]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
Date
Sometimes boot loaders set CPU frequency to a value outside of frequency table
present with cpufreq core. In such cases CPU might be unstable if it has to run
on that frequency for long duration of time and so its better to set it to a
frequency which is specified in frequency table.

Sachin recently found this problem with cpufreq-cpu0 driver when he was testing
it for Exynos.

Set this flag for cpufreq-cpu0 driver.

Reported-and-tested-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/cpufreq/cpufreq-cpu0.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 09b9129..ee1ae30 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -104,7 +104,7 @@ static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
}

static struct cpufreq_driver cpu0_cpufreq_driver = {
- .flags = CPUFREQ_STICKY,
+ .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = cpu0_set_target,
.get = cpufreq_generic_get,
--
2.0.0.rc2


\
 
 \ /
  Last update: 2014-06-09 16:21    [W:0.025 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site