lkml.org 
[lkml]   [2014]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: gpio: fix default of regulator-type property
Date
As per driver, the absense of "regulator-type" default to voltage
type. Correct the document to say default is voltage instead of
current.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Documentation/devicetree/bindings/regulator/gpio-regulator.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
index e5cac1e..dd1ed78 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -13,7 +13,7 @@ Optional properties:
- startup-delay-us : Startup time in microseconds.
- enable-active-high : Polarity of GPIO is active high (default is low).
- regulator-type : Specifies what is being regulated, must be either
- "voltage" or "current", defaults to current.
+ "voltage" or "current", defaults to voltage.

Any property defined as part of the core regulator binding defined in
regulator.txt can also be used.
--
1.8.1.5


\
 
 \ /
  Last update: 2014-06-06 13:21    [W:0.056 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site