[lkml]   [2014]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v6 0/4] ARM: SMP: support Broadcom mobile SoCs
This series adds SMP support for two Broadcom mobile SoC families.
It uses CPU_METHOD_OF_DECLARE() so that SMP operations are assigned
using device tree rather than adding it to a machine definition in a
board file.

The enable method starts a secondary core by writing to a register
monitored by CPUs spinning in a ROM-based holding pen loop. The
address of this register is recorded as a property in the "cpus"
node of the device tree.


- This series previously included the binding as its first patch. That
has now been posted separately to facilitate and focus review.
- This series is based on v3.16-rc1, plus two recently-posted patches:
- This series, along with the binding patch, is available here:
Branch review/bcm-smp-v6

v6: - Only change was to separate the binding patch from the series.
v5: - No real change; rebased onto v3.16-rc1.
v4: - Renamed "platsmp.c" to be "kona_smp.c".
- Rebased onto v3.15-rc5
v3: - Dropped definition and use of CPU_METHOD_OF_DECLARE_SETUP()
- Added documentation for "enable-method"
- Rebased onto v3.15-rc4
v2: - Fixed a Makefile error (:= should have been +=)
- No longer set CONFIG_NR_CPUS in bcm_defconfig
- Rebased onto v3.15-rc1

Alex Elder (4):
ARM: add SMP support for Broadcom mobile SoCs
ARM: configs: enable SMP in bcm_defconfig
ARM: dts: enable SMP support for bcm28155
ARM: dts: enable SMP support for bcm21664

arch/arm/boot/dts/bcm11351.dtsi | 19 ++++
arch/arm/boot/dts/bcm21664.dtsi | 19 ++++
arch/arm/configs/bcm_defconfig | 1 +
arch/arm/mach-bcm/Kconfig | 18 +++-
arch/arm/mach-bcm/Makefile | 3 +
arch/arm/mach-bcm/kona_smp.c | 202 ++++++++++++++++++++++++++++++++++++++++
6 files changed, 259 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/mach-bcm/kona_smp.c


 \ /
  Last update: 2014-07-01 00:41    [W:0.067 / U:26.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site