lkml.org 
[lkml]   [2014]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.10 11/77] ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP
Date
3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Bolle <pebolle@tiscali.nl>

commit 77c2f02edbeda9409a7cf3fd66233015820c213a upstream.

Commit 193ab2a60700 ("usb: gadget: allow multiple gadgets to be built")
apparently required that checks for CONFIG_USB_GADGET_OMAP would be
replaced with checks for CONFIG_USB_OMAP. Do so now for the remaining
checks for CONFIG_USB_GADGET_OMAP, even though these checks have
basically been broken since v3.1.

And, since we're touching this code, use the IS_ENABLED() macro, so
things will now (hopefully) also work if USB_OMAP is modular.

Fixes: 193ab2a60700 ("usb: gadget: allow multiple gadgets to be built")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm/mach-omap1/board-h2.c | 2 +-
arch/arm/mach-omap1/board-h3.c | 2 +-
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/board-osk.c | 2 +-
drivers/usb/phy/phy-isp1301-omap.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)

--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -379,7 +379,7 @@ static struct omap_usb_config h2_usb_con
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,

-#ifdef CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
/* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -366,7 +366,7 @@ static struct omap_usb_config h3_usb_con
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,

-#ifdef CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -312,7 +312,7 @@ static struct omap_usb_config h2_usb_con
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,

-#ifdef CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
/* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -280,7 +280,7 @@ static struct omap_usb_config osk_usb_co
* be used, with a NONSTANDARD gender-bending cable/dongle, as
* a peripheral.
*/
-#ifdef CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
.register_dev = 1,
.hmc_mode = 0,
#else
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -1299,7 +1299,7 @@ isp1301_set_host(struct usb_otg *otg, st
return isp1301_otg_enable(isp);
return 0;

-#elif !defined(CONFIG_USB_GADGET_OMAP)
+#elif !IS_ENABLED(CONFIG_USB_OMAP)
// FIXME update its refcount
otg->host = host;




\
 
 \ /
  Last update: 2014-06-28 20:21    [W:0.374 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site