lkml.org 
[lkml]   [2014]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC][PATCH 3/5 v2] seq_buf: Move the seq_buf code to lib/
On Fri 2014-06-27 10:27:15, Steven Rostedt wrote:
> On Fri, 27 Jun 2014 15:48:10 +0200
> Petr Mládek <pmladek@suse.cz> wrote:
>
> > On Thu 2014-06-26 17:49:04, Steven Rostedt wrote:
> > > From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>
> > >
> > > The seq_buf functions are rather useful outside of tracing. Instead
> > > of having it be dependent on CONFIG_TRACING, move the code into lib/
> > > and allow other users to have access to it even when tracing is not
> > > configured.
> > >
> > > The seq_buf utility is similar to the seq_file utility, but instead of
> > > writing sending data back up to userland, it writes it into a buffer
> > > defined at seq_buf_init(). This allows us to send a descriptor around
> > > that writes printf() formatted strings into it that can be retrieved
> > > later.
> > >
> > > It is currently used by the tracing facility for such things like trace
> > > events to convert its binary saved data in the ring buffer into an
> > > ASCII human readable context to be displayed in /sys/kernel/debug/trace.
> > >
> > > It can also be used for doing NMI prints safely from NMI context into
> > > the seq_buf and retrieved later and dumped to printk() safely. Doing
> > > printk() from an NMI context is dangerous because an NMI can preempt
> > > a current printk() and deadlock on it.
> > >
> > > Link: http://lkml.kernel.org/p/20140619213952.058255809@goodmis.org
> > >
> > > Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
> > > ---
> > > kernel/trace/seq_buf.c | 348 -------------------------------------------------
> > > lib/Makefile | 2 +-
> > > lib/seq_buf.c | 348 +++++++++++++++++++++++++++++++++++++++++++++++++
> > > lib/trace_seq.c | 303 ++++++++++++++++++++++++++++++++++++++++++
> >
> > I guess that lib/trace_seq.c was copied by mistake.
>
> Heh, that's what I get for using both quilt and git :-)
>
> To start with what I had before (and use my scripts for the Link tag),
> I pulled the old patch from my email and pulled it into a quilt queue.
> Did a "quilt push -f" and then started from there. I removed all the
> trace_seq.c updates but forgot that quilt push -f would create the file
> in lib/.
>
> When done with all my updates, I just did a git am of the patch in my
> quilt queue, which pulled in the old copy of trace_seq.c in lib/ :-p

:-)

> I'll remove it.
>
> >
> > > 4 files changed, 652 insertions(+), 349 deletions(-)
> > > delete mode 100644 kernel/trace/seq_buf.c
> > > create mode 100644 lib/seq_buf.c
> > > create mode 100644 lib/trace_seq.c
> > >
> > > diff --git a/lib/Makefile b/lib/Makefile
> > > index ba967a19edba..6007194082c6 100644
> > > --- a/lib/Makefile
> > > +++ b/lib/Makefile
> > > @@ -13,7 +13,7 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
> > > sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \
> > > proportions.o flex_proportions.o prio_heap.o ratelimit.o show_mem.o \
> > > is_single_threaded.o plist.o decompress.o kobject_uevent.o \
> > > - earlycpio.o
> > > + earlycpio.o seq_buf.o
> > >
> > > obj-$(CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS) += usercopy.o
> > > lib-$(CONFIG_MMU) += ioremap.o
> >
> > There is missing:
>
> Nope, it just was copied by mistake. It only added dead code, it didn't
> move it.

It is really missing! You removed kernel/trace/seq_buf.c and you have to
remove it also from kernel/trace/Makefile. :-)

Best Regards,
Petr

> -- Steve
>
> >
> > diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile
> > index edc98c72a634..67d6369ddf83 100644
> > --- a/kernel/trace/Makefile
> > +++ b/kernel/trace/Makefile
> > @@ -29,7 +29,6 @@ obj-$(CONFIG_RING_BUFFER_BENCHMARK) += ring_buffer_benchmark.o
> > obj-$(CONFIG_TRACING) += trace.o
> > obj-$(CONFIG_TRACING) += trace_output.o
> > obj-$(CONFIG_TRACING) += trace_seq.o
> > -obj-$(CONFIG_TRACING) += seq_buf.o
> > obj-$(CONFIG_TRACING) += trace_stat.o
> > obj-$(CONFIG_TRACING) += trace_printk.o
> > obj-$(CONFIG_CONTEXT_SWITCH_TRACER) += trace_sched_switch.o
> >
> >
> > Best Regards,
> > Petr
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-06-27 17:21    [W:0.057 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site