lkml.org 
[lkml]   [2014]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V4 13/16] irqchip: crossbar: Introduce ti,max-crossbar-sources to identify valid crossbar mapping
On Thu, Jun 26, 2014 at 12:40:31PM +0530, Sricharan R wrote:
> From: Nishanth Menon <nm@ti.com>
>
> Currently we attempt to map any crossbar value to an IRQ, however,
> this is not correct from hardware perspective. There is a max crossbar
> event number upto which hardware supports. So describe the same in
> device tree using 'ti,max-crossbar-sources' property and use it to
> validate requests.
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Sricharan R <r.sricharan@ti.com>
> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
> .../devicetree/bindings/arm/omap/crossbar.txt | 2 ++
> drivers/irqchip/irq-crossbar.c | 21 ++++++++++++++++++--
> 2 files changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
> index 5f45c78..6923531 100644
> --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
> @@ -10,6 +10,7 @@ Required properties:
> - compatible : Should be "ti,irq-crossbar"
> - reg: Base address and the size of the crossbar registers.
> - ti,max-irqs: Total number of irqs available at the interrupt controller.
> +- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
> - ti,reg-size: Size of a individual register in bytes. Every individual
> register is assumed to be of same size. Valid sizes are 1, 2, 4.
> - ti,irqs-reserved: List of the reserved irq lines that are not muxed using
> @@ -30,6 +31,7 @@ Examples:
> compatible = "ti,irq-crossbar";
> reg = <0x4a002a48 0x130>;
> ti,max-irqs = <160>;
> + ti,max-crossbar-sources = <MAX_SOURCES>;

As mentioned in my reply to #15, I can change this to 400 when I apply
it, or you can send a new version of #15 using the macro and explaining
it's definition.

Thinking about it more, it's probably best just to use numbers in the
docs.

thx,

Jason.


\
 
 \ /
  Last update: 2014-06-27 15:21    [W:0.135 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site