lkml.org 
[lkml]   [2014]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] phy: micrel: make phy_has_fixups attribute read correctly
Hi Florian,

On 06/27/2014 02:00 AM, Florian Fainelli wrote:
> Hello,
>
> 2014-06-25 0:24 GMT-07:00 Bo Shen <voice.shen@atmel.com>:
>> If the fixups parameters get from dtb, it won't set has_fixups
>> parameters, so when read phy_has_fixups attribute, it always
>> present as 0.
>> Add this patch to make phy_has_fixups attribute read correctly.
>
> I am not entirely sure whether loading values from Device Tree should
> be considered a PHY fixup per-se. They do override the hardware reset
> default values, but I am not sure if we should consider that as a
> fixup.

In old method, we will call phy_register_fixup_for_uid to update this
configuration, which will set the phy_has_fixups as true, then it
regards as fix up. So, can we also consider loading values from DTS also
as fix up?

> Assuming that you need to troubleshoot a given system, one of the
> first things you will surely ask for is the DTS used by that platform,
> and in that case you can quickly check whether the PHY default
> settings are changed, right?

I am not sure I am fully understand here.

The value retrieve from DTS is used to overwrite the default value, so I
think it is no need to check.

>>
>> Signed-off-by: Bo Shen <voice.shen@atmel.com>
>> ---
>> drivers/net/phy/micrel.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
>> index bc7c7d2..c384922 100644
>> --- a/drivers/net/phy/micrel.c
>> +++ b/drivers/net/phy/micrel.c
>> @@ -237,6 +237,8 @@ static int ksz9021_load_values_from_of(struct phy_device *phydev,
>>
>> if (!matches)
>> return 0;
>> + else
>> + phydev->has_fixups = true;
>
> There is no need for the else here
>
>>
>> if (matches < 4)
>> newval = kszphy_extended_read(phydev, reg);
>> @@ -330,6 +332,8 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev,
>>
>> if (!matches)
>> return 0;
>> + else
>> + phydev->has_fixups = true;
>
> Same here
>
>>
>> if (matches < numfields)
>> newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
>> --
>> 1.8.5.2

Best Regards,
Bo Shen



\
 
 \ /
  Last update: 2014-06-27 06:21    [from the cache]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and my Meterkast|Read the blog