lkml.org 
[lkml]   [2014]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] readq/writeq: Add explicit lo_hi_[read|write]_q and hi_lo_[read|write]_q
Date
Even on x86-64, I've found the need to break up a readq() into 2 readl()
calls. According to the Intel datasheet for the E3-1200 processor:

"
Software must not access B0/D0/F0 32-bit memory-mapped registers with
requests that cross a DW boundary.
"

(http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html p. 16)

I can confirm this is true via several hard machine lockups.

Thus, add explicit hi_lo_[readq|write]_q and lo_hi_[read|write]_q so that these
uses are spelled out.

Signed-off-by: Jason Baron <jbaron@akamai.com>
---
include/asm-generic/io-64-nonatomic-hi-lo.h | 14 +++++++++-----
include/asm-generic/io-64-nonatomic-lo-hi.h | 14 +++++++++-----
2 files changed, 18 insertions(+), 10 deletions(-)

diff --git a/include/asm-generic/io-64-nonatomic-hi-lo.h b/include/asm-generic/io-64-nonatomic-hi-lo.h
index a6806a9..2e29d13 100644
--- a/include/asm-generic/io-64-nonatomic-hi-lo.h
+++ b/include/asm-generic/io-64-nonatomic-hi-lo.h
@@ -4,8 +4,7 @@
#include <linux/io.h>
#include <asm-generic/int-ll64.h>

-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
+static inline __u64 hi_lo_readq(const volatile void __iomem *addr)
{
const volatile u32 __iomem *p = addr;
u32 low, high;
@@ -15,14 +14,19 @@ static inline __u64 readq(const volatile void __iomem *addr)

return low + ((u64)high << 32);
}
-#endif

-#ifndef writeq
-static inline void writeq(__u64 val, volatile void __iomem *addr)
+static inline void hi_lo_writeq(__u64 val, volatile void __iomem *addr)
{
writel(val >> 32, addr + 4);
writel(val, addr);
}
+
+#ifndef readq
+#define readq hi_lo_readq
+#endif
+
+#ifndef writeq
+#define writeq hi_lo_writeq
#endif

#endif /* _ASM_IO_64_NONATOMIC_HI_LO_H_ */
diff --git a/include/asm-generic/io-64-nonatomic-lo-hi.h b/include/asm-generic/io-64-nonatomic-lo-hi.h
index ca546b1..0efacff 100644
--- a/include/asm-generic/io-64-nonatomic-lo-hi.h
+++ b/include/asm-generic/io-64-nonatomic-lo-hi.h
@@ -4,8 +4,7 @@
#include <linux/io.h>
#include <asm-generic/int-ll64.h>

-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
+static inline __u64 lo_hi_readq(const volatile void __iomem *addr)
{
const volatile u32 __iomem *p = addr;
u32 low, high;
@@ -15,14 +14,19 @@ static inline __u64 readq(const volatile void __iomem *addr)

return low + ((u64)high << 32);
}
-#endif

-#ifndef writeq
-static inline void writeq(__u64 val, volatile void __iomem *addr)
+static inline void lo_hi_writeq(__u64 val, volatile void __iomem *addr)
{
writel(val, addr);
writel(val >> 32, addr + 4);
}
+
+#ifndef readq
+#define readq lo_hi_readq
+#endif
+
+#ifndef writeq
+#define writeq lo_hi_writeq
#endif

#endif /* _ASM_IO_64_NONATOMIC_LO_HI_H_ */
--
1.8.2.rc2


\
 
 \ /
  Last update: 2014-06-27 00:41    [W:0.034 / U:11.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site