Messages in this thread Patch in this message | | | From | Boris BREZILLON <> | Subject | [PATCH v2 2/2] ARM: at91: remove phy fixup for sama5d3xek boards | Date | Thu, 26 Jun 2014 12:13:35 +0200 |
| |
These board specific delays are now configured through micrel's specific DT bindings (see Documentation/devicetree/bindings/net/micrel-ksz9021.txt).
Remove this phy fixup registration from sama5 DT machine file to keep it as generic as possible.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> --- arch/arm/mach-at91/board-dt-sama5.c | 22 ---------------------- 1 file changed, 22 deletions(-)
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index d6fe04b..8c5814f 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -35,30 +35,8 @@ static void __init sama5_dt_timer_init(void) at91sam926x_pit_init(); } -static int ksz9021rn_phy_fixup(struct phy_device *phy) -{ - int value; - - /* Set delay values */ - value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0xF2F4; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0x2222; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - - return 0; -} - static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d3xcm") && - IS_ENABLED(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, - ksz9021rn_phy_fixup); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -- 1.8.3.2
| |