Messages in this thread | | | Date | Wed, 25 Jun 2014 20:11:12 +0200 | From | Javier Martinez Canillas <> | Subject | Re: [PATCH v3 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system |
| |
On 06/25/2014 07:24 PM, Doug Anderson wrote: > Hi, > > On Wed, Jun 25, 2014 at 3:29 AM, Javier Martinez Canillas > <javier.martinez@collabora.co.uk> wrote: >> Yes, the original Chrome OS 3.8 max77xxx also called the irq worker thread to >> ack the interrupt. >> >> So the real problem is that an interrupt occurs before the I2C bus controller is >> resumed and so the interrupt handler is not able to access the registers over I2C. >> >> Doug posted the following patches [0,1] that AFAIU solves the issue by making >> I2C controllers to be resumed in the noirq time to ensure that drivers will be >> able to use the I2C bus to handler their wakeup. > > Yup, that's the solution as far as I know. I know that in ChromeOS we > still have the extra call to the worker thread (despite the controller > waking up early), but that might be related to some other problem? > > I was able to successfully suspend/resume multiple times once I woke > the i2c controller up earlier. > > If you feel like adding Reviewed-by / Tested-by to my i2c patch then > feel free! ;) > >
Done :)
>> In fact, Doug's original patch had this as a part of the commit message: >> >> NOTE: due to wakeup ordering problems this patch alone doesn't work so >> well on exynos5250-snow. You also need something that brings the i2c >> bus up before the max77686 wakeup runs. >> >> I removed that note since I (probably wrong) thought that he didn't mean it to >> be part of the commit message but just was side information. > > I probably would have left that in the patch, but I'm not objecting to > you taking it out. :) >
Yes, I should had left that as well. I'll send a v4 shortly and will include the note again.
Best regards, Javier
| |