lkml.org 
[lkml]   [2014]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] ARM: tegra: roth: enable input on mmc clock pins
On 06/23/2014 11:44 PM, Alexandre Courbot wrote:
> On 06/24/2014 04:01 AM, Stephen Warren wrote:
>> On 06/23/2014 01:32 AM, Alexandre Courbot wrote:
>>> Input had been disabled by mistake on these pins, leading to issues with
>>> SDIO devices like the Wifi module not being probed or random errors
>>> occuring on the SD card.
>>
>> I thought the host controller always drove the clock, so there should be
>> no need for the pin's input path to be enabled. Perhaps it depends on
>> the transfer mode (e.g. UHS)?
>
> That's what I thought too, so I went against what was done downstream
> and disabled input mode. Eventually noticed various issues with MMC
> devices, reverted to the downstream settings and noticed my problems
> were solved by this single change.

Hmm. That's odd. Can you talk to one of the HW engineers behind the
SDHCI controller and get a definitive answer. Thanks.


\
 
 \ /
  Last update: 2014-06-24 19:41    [W:0.080 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site