lkml.org 
[lkml]   [2014]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: On-stack work item completion race? (was Re: XFS crash?)
[Adding tglx to the cc.  Sorry for any double sends]

On Mon, Jun 23, 2014 at 8:25 PM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On Tue, Jun 24, 2014 at 01:02:40PM +1000, Dave Chinner wrote:
>> start_flush_work() is effectively a special queue_work()
>> implementation, so if if it's not safe to call complete() from the
>> workqueue as the above patch implies then this code has the same
>> problem.
>>
>> Tejun - is this "do it yourself completion" a known issue w.r.t.
>> workqueues? I can't find any documentation that says "don't do
>> that" so...?
>
> It's more complex than using flush_work() but there's nothing
> fundamentally wrong with it. A work item is completely unlinked
> before its execution starts. It's safe to free the work item once its
> work function started, whether through kfree() or returning.
>
> One difference between flush_work() and manual completion would be
> that if the work item gets requeued, flush_work() would wait for the
> queued one to finish but given the work item is one-shot this doesn't
> make any difference.
>
> I can see no reason why manual completion would behave differently
> from flush_work() in this case.

I went looking for a short trace in my original log to show the
problem, and instead found evidence of the second problem. I still
like the shorter flush_work call, but that's not my call.

I did find this comment in the process_one_work function. Sounds like
this could be better documented.

/*
* It is permissible to free the struct work_struct from
* inside the function that is called from it, this we need to
* take into account for lockdep too. To avoid bogus "held
* lock freed" warnings as well as problems when looking into
* work->lockdep_map, make a copy and use that here.
*/

>> As I understand it, what then happens is that the workqueue code
>> grabs another kworker thread and runs the next work item in it's
>> queue. IOWs, work items can block, but doing that does not prevent
>> execution of other work items queued on other work queues or even on
>> the same work queue. Tejun, did I get that correct?
>
> Yes, as long as the workqueue is under its @max_active limit and has
> access to an existing kworker or can create a new one, it'll start
> executing the next work item immediately; however, the guaranteed
> level of concurrency is 1 even for WQ_RECLAIM workqueues. IOW, the
> work items queued on a workqueue must be able to make forward progress
> with single work item if the work items are being depended upon for
> memory reclaim.

I mentioned this to Dave when I initially started this thread, but I'm
running a RT patched kernel. I don't see forwards progress. The
workqueue is only used in 1 spot (xfs_alloc_wq), and has
WQ_MEM_RECLAIM set. I started with a 10,000,000 line trace and pulled
out the entries which referenced the workqueue and pool leading up to
the lockup.

scp-4110 [001] ....1.3 101.184640:
workqueue_queue_work: work struct=ffff8803c782d900
function=xfs_bmapi_allocate_worker workqueue=ffff88040c9f5a00
pool=ffff88042dae3fc0 req_cpu=512 cpu=1
scp-4110 [001] ....1.3 101.184641:
workqueue_activate_work: work struct ffff8803c782d900
kworker/1:1-89 [001] ....1.1 101.184883:
workqueue_nr_running: pool=ffff88042dae3fc0 nr_running=1
kworker/1:1-89 [001] ....1.. 101.184885:
workqueue_execute_start: work struct ffff8803c782d900: function
xfs_bmapi_allocate_worker
irq/44-ahci-275 [001] ....1.5 101.185086:
workqueue_queue_work: work struct=ffff8800ae3f01e0 function=xfs_end_io
workqueue=ffff88040b459a00 pool=ffff88042dae3fc0 req_cpu=512 cpu=1
irq/44-ahci-275 [001] ....1.5 101.185088:
workqueue_activate_work: work struct ffff8800ae3f01e0
scp-4110 [001] ....1.. 101.187911: xfs_ilock: dev 8:5
ino 0xf9e flags ILOCK_EXCL caller xfs_iomap_write_allocate
scp-4110 [001] ....1.3 101.187914:
workqueue_queue_work: work struct=ffff8803c782d900
function=xfs_bmapi_allocate_worker workqueue=ffff88040c9f5a00
pool=ffff88042dae3fc0 req_cpu=512 cpu=1
scp-4110 [001] ....1.3 101.187915:
workqueue_activate_work: work struct ffff8803c782d900
scp-4110 [001] ....1.4 101.187926:
workqueue_queue_work: work struct=ffff88040a6a01c8
function=blk_delay_work workqueue=ffff88040c9f4a00
pool=ffff88042dae44c0 req_cpu=512 cpu=1
scp-4110 [001] ....1.4 101.187926:
workqueue_activate_work: work struct ffff88040a6a01c8
kworker/1:1-89 [001] ....1.. 101.187998:
workqueue_execute_end: work struct ffff8803c782d900
kworker/1:1-89 [001] ....1.. 101.188000:
workqueue_execute_start: work struct ffff8800ae3f01e0: function
xfs_end_io
kworker/1:1-89 [001] ....1.. 101.188001: xfs_ilock: dev 8:5
ino 0xf9e flags ILOCK_EXCL caller xfs_setfilesize

The last work never runs. Hangcheck triggers shortly after.

I spent some more time debugging, and I am seeing that
tsk_is_pi_blocked is returning 1 in sched_submit_work
(kernel/sched/core.c). It looks like sched_submit_work is not
detecting that the worker task is blocked on a mutex.

This looks very RT related right now. I see 2 problems from my
reading (and experimentation). The first is that the second worker
isn't getting started because tsk_is_pi_blocked is reporting that the
task isn't blocked on a mutex. The second is that even if another
worker needs to be scheduled because the original worker is blocked on
a mutex, we need the pool lock to schedule another worker. The pool
lock can be acquired by any CPU, and is a spin_lock. If we end up on
the slow path for the pool lock, we hit
BUG_ON(rt_mutex_real_waiter(task->pi_blocked_on)) in
task_blocks_on_rt_mutex in rtmutex.c. I'm not sure how to deal with
either problem. Thomas, any ideas?

Hopefully I've got all my facts right... Debugging kernel code is a
whole new world from userspace code.

Thanks!
Austin


\
 
 \ /
  Last update: 2014-06-25 05:41    [W:0.102 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site