lkml.org 
[lkml]   [2014]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/3] ata: Add Qualcomm ARM SoC AHCI SATA host controller driver
From
Date

On Jun 17, 2014, at 7:25 AM, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> wrote:

>
> Hi,
>
> On Friday, June 13, 2014 11:16:03 AM Kumar Gala wrote:
>> Add support for the Qualcomm AHCI SATA controller that exists on several
>> SoC and specifically the IPQ806x family of chips. The IPQ806x SATA support
>> requires the associated IPQ806x SATA PHY Driver to be enabled as well.
>>
>> Signed-off-by: Kumar Gala <galak@codeaurora.org>
>> ---
>> v2:
>> * Fixed MODULE_LICENSE to be GPL v2
>>
>> drivers/ata/Kconfig | 10 ++++++
>> drivers/ata/Makefile | 1 +
>> drivers/ata/ahci_qcom.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 97 insertions(+)
>> create mode 100644 drivers/ata/ahci_qcom.c
>>
>> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
>> index 7671dba..aa88648 100644
>> --- a/drivers/ata/Kconfig
>> +++ b/drivers/ata/Kconfig
>> @@ -132,6 +132,16 @@ config AHCI_MVEBU
>>
>> If unsure, say N.
>>
>> +config AHCI_QCOM
>> + tristate "Qualcomm AHCI SATA support"
>> + depends on ARCH_QCOM
>> + help
>> + This option enables support for AHCI SATA controller
>> + integrated into Qualcomm ARM SoC chipsets. For more
>> + information please refer to http://www.qualcomm.com/chipsets.
>> +
>> + If unsure, say N.
>> +
>> config AHCI_SUNXI
>> tristate "Allwinner sunxi AHCI SATA support"
>> depends on ARCH_SUNXI
>> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
>> index 5a02aee..15401e9 100644
>> --- a/drivers/ata/Makefile
>> +++ b/drivers/ata/Makefile
>> @@ -13,6 +13,7 @@ obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
>> obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
>> obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
>> obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o
>> +obj-$(CONFIG_AHCI_QCOM) += ahci_qcom.o libahci.o libahci_platform.o
>> obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o
>> obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o
>> obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o
>> diff --git a/drivers/ata/ahci_qcom.c b/drivers/ata/ahci_qcom.c
>> new file mode 100644
>> index 0000000..bfb7a77
>> --- /dev/null
>> +++ b/drivers/ata/ahci_qcom.c
>> @@ -0,0 +1,86 @@
>> +/*
>> + * Qualcomm ARM SoC AHCI SATA platform driver
>> + *
>> + * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
>> + *
>> + * Copyright (c) 2014, The Linux Foundation. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/pm.h>
>> +#include <linux/device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/libata.h>
>> +#include <linux/ahci_platform.h>
>> +#include "ahci.h"
>> +
>> +static const struct ata_port_info qcom_ahci_port_info = {
>> + .flags = AHCI_FLAG_COMMON,
>> + .pio_mask = ATA_PIO4,
>> + .udma_mask = ATA_UDMA6,
>> + .port_ops = &ahci_platform_ops,
>> +};
>> +
>> +static int qcom_ahci_probe(struct platform_device *pdev)
>> +{
>> + struct ahci_host_priv *hpriv;
>> + struct clk *rxoob_clk;
>> + int rc;
>> +
>> + hpriv = ahci_platform_get_resources(pdev);
>> + if (IS_ERR(hpriv))
>> + return PTR_ERR(hpriv);
>> +
>> + /* Try and set the rxoob clk to 100Mhz */
>> + rxoob_clk = of_clk_get_by_name(pdev->dev.of_node, "rxoob");
>> + if (IS_ERR(rxoob_clk))
>> + return PTR_ERR(rxoob_clk);
>> +
>> + rc = clk_set_rate(rxoob_clk, 100000000);
>
> Shouldn't the clk_prepare_enable() be called first?

I don’t believe there is any requirement for clk_prepare_enable to be called first.

>
>> + if (rc)
>> + return rc;
>
> of_clk_get_by_name() gets an extra reference on the clock so clk_put()
> should be called on failure.

will fix.

>
>> + rc = ahci_platform_enable_resources(hpriv);
>> + if (rc)
>> + return rc;
>> +
>> + rc = ahci_platform_init_host(pdev, hpriv, &qcom_ahci_port_info, 0, 0);
>> + if (rc)
>> + goto disable_resources;
>> +
>> + return 0;
>> +disable_resources:
>> + ahci_platform_disable_resources(hpriv);
>> + return rc;
>> +}
>> +
>> +static const struct of_device_id qcom_ahci_of_match[] = {
>> + { .compatible = "qcom,msm-ahci", },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, qcom_ahci_of_match);
>> +
>> +static struct platform_driver qcom_ahci_driver = {
>> + .probe = qcom_ahci_probe,
>> + .remove = ata_platform_remove_one,
>> + .driver = {
>> + .name = "qcom_ahci_qcom",
>> + .owner = THIS_MODULE,
>> + .of_match_table = qcom_ahci_of_match,
>> + },
>
> This driver lacks PM suspend/resume support. I assume that
> the IPQ806x platform also doesn't support suspend/resume yet
> (if so a comment in the driver code about this would be useful),
> otherwise the driver should be fixed.

Correct, do you want the comment in the commit message or the driver itself?

>
>> +};
>> +module_platform_driver(qcom_ahci_driver);
>> +
>> +MODULE_DESCRIPTION("Qualcomm AHCI SATA platform driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_ALIAS("ahci:qcom");
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-06-20 15:41    [W:0.073 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site