lkml.org 
[lkml]   [2014]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
From
Date

On Jun 16, 2014, at 5:04 AM, Kishon Vijay Abraham I <kishon@ti.com> wrote:

> Hi,
>
> On Friday 13 June 2014 12:48 AM, Kumar Gala wrote:
>> Add a PHY driver for uses with AHCI based SATA controller driver on the
>> IPQ806x family of SoCs.
>>
>> Signed-off-by: Kumar Gala <galak@codeaurora.org>
>> ---
>> drivers/phy/Kconfig | 6 ++
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-qcom-ipq806x-sata.c | 204 ++++++++++++++++++++++++++++++++++++
>> 3 files changed, 211 insertions(+)
>> create mode 100644 drivers/phy/phy-qcom-ipq806x-sata.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 16a2f06..52bfb93 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -178,4 +178,10 @@ config PHY_XGENE
>> help
>> This option enables support for APM X-Gene SoC multi-purpose PHY.
>>
>> +config PHY_QCOM_IPQ806X_SATA
>> + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
>> + depends on ARCH_QCOM
>> + depends on OF
> depends on HAS_IOMEM?

will add

>> + select GENERIC_PHY
>> +
>> endmenu
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index b4f1d57..d950317 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -20,3 +20,4 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
>> phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
>> obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
>> obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
>> +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
>> diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/phy-qcom-ipq806x-sata.c
>> new file mode 100644
>> index 0000000..fc57340
>> --- /dev/null
>> +++ b/drivers/phy/phy-qcom-ipq806x-sata.c
>> @@ -0,0 +1,204 @@
>> +/*
>> + * Copyright (c) 2014, The Linux Foundation. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/time.h>
>> +#include <linux/delay.h>
>> +#include <linux/clk.h>
>> +#include <linux/slab.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/phy/phy.h>
>> +
>> +struct qcom_ipq806x_sata_phy {
>> + struct device *dev;
>
> dev is not used anywhere. remove it.

already done in v2

>> + void __iomem *mmio;
>> + struct clk *cfg_clk;
>> +};
>> +
>> +#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
>> +
>> +#define SATA_PHY_P0_PARAM0 0x200
>> +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12)
>> +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12)
>> +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6)
>> +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6)
>> +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0)
>> +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0)
>> +
>> +#define SATA_PHY_P0_PARAM1 0x204
>> +#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21)
>> +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14)
>> +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14)
>> +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7)
>> +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7)
>> +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0)
>> +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0)
>> +
>> +#define SATA_PHY_P0_PARAM2 0x208
>> +#define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18)
>> +#define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18)
>> +
>> +#define SATA_PHY_P0_PARAM3 0x20C
>> +#define SATA_PHY_SSC_EN 0x8
>> +#define SATA_PHY_P0_PARAM4 0x210
>> +#define SATA_PHY_REF_SSP_EN 0x2
>> +#define SATA_PHY_RESET 0x1
>> +
>> +static inline void qcom_ipq806x_sata_delay_us(unsigned int delay)
>> +{
>> + /* sleep for max. 50us more to combine processor wakeups */
>> + usleep_range(delay, delay + 50);
>> +}
>> +
>> +static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy)
>> +{
>> + struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
>> + u32 reg = 0;
>> +
>> + /* Setting SSC_EN to 1 */
>> + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3);
>
> Why readl_relaxed?

because there is no need for readl’s memory barriers here.

>> + reg = reg | SATA_PHY_SSC_EN;
>> + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3);
>> +
>> + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) &
>> + ~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK |
>> + SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK |
>> + SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK);
>> + reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf);
>> + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0);
>> +
>> + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) &
>> + ~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK |
>> + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK |
>> + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK);
>> + reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) |
>> + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) |
>> + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55);
>> + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1);
>> +
>> + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) &
>> + ~SATA_PHY_P0_PARAM2_RX_EQ_MASK;
>> + reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3);
>> + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2);
>> +
>> + /* Setting PHY_RESET to 1 */
>> + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
>> + reg = reg | SATA_PHY_RESET;
>> + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
>> +
>> + /* Setting REF_SSP_EN to 1 */
>> + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
>> + reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET;
>> + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
>> + mb();
>> + qcom_ipq806x_sata_delay_us(20);
>> +
>> + /* Clearing PHY_RESET to 0 */
>> + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
>> + reg = reg & ~SATA_PHY_RESET;
>> + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
>> +
>> + return 0;
>> +}
>> +
>> +static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy)
>> +{
>> + struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
>> + u32 reg = 0;
>> +
>> + /* Setting PHY_RESET to 1 */
>> + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
>> + reg = reg | SATA_PHY_RESET;
>> + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
>> +
>> + return 0;
>> +}
>> +
>> +static struct phy_ops qcom_ipq806x_sata_phy_ops = {
>> + .init = qcom_ipq806x_sata_phy_init,
>> + .exit = qcom_ipq806x_sata_phy_exit,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
>> +{
>> + struct qcom_ipq806x_sata_phy *phy;
>> + struct device *dev = &pdev->dev;
>> + struct resource *res;
>> + struct phy_provider *phy_provider;
>> + struct phy *generic_phy;
>> + int ret;
>> +
>> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
>> + if (!phy) {
>> + dev_err(dev, "%s: failed to allocate phy\n", __func__);
>> + return -ENOMEM;
>> + }
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + phy->mmio = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(phy->mmio)) {
>> + dev_err(dev, "%s: phy mmio get resource failed\n", __func__);
>> + return PTR_ERR(phy->mmio);
>> + }
>> +
>> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> + if (IS_ERR(phy_provider)) {
>> + dev_err(dev, "%s: failed to register phy\n", __func__);
>> + return PTR_ERR(phy_provider);
>> + }
>
> phy_provider_register should be the last step. Move it after phy_set_drvdata().

will fix

>
> Thanks
> Kishon
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-06-16 23:01    [W:0.071 / U:27.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site