lkml.org 
[lkml]   [2014]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 1/7] clk: kona: move some code
Date
Move the definition of __peri_clk_init() up in "clk-kona.c", in
preparation for the next patch (so it's defined before it's needed).
Move kona_ccu_init() and __kona_clk_init() as well.

Done as a separate patch so doing so doesn't obscure other changes.

Signed-off-by: Alex Elder <elder@linaro.org>
---
drivers/clk/bcm/clk-kona.c | 174 ++++++++++++++++++++++-----------------------
1 file changed, 87 insertions(+), 87 deletions(-)

diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
index 95af2e6..b643d35 100644
--- a/drivers/clk/bcm/clk-kona.c
+++ b/drivers/clk/bcm/clk-kona.c
@@ -981,6 +981,93 @@ static int selector_write(struct ccu_data *ccu, struct bcm_clk_gate *gate,
return ret;
}

+/* Put a peripheral clock into its initial state */
+static bool __peri_clk_init(struct kona_clk *bcm_clk)
+{
+ struct ccu_data *ccu = bcm_clk->ccu;
+ struct peri_clk_data *peri = bcm_clk->u.peri;
+ const char *name = bcm_clk->init_data.name;
+ struct bcm_clk_trig *trig;
+
+ BUG_ON(bcm_clk->type != bcm_clk_peri);
+
+ if (!policy_init(ccu, &peri->policy)) {
+ pr_err("%s: error initializing policy for %s\n",
+ __func__, name);
+ return false;
+ }
+ if (!gate_init(ccu, &peri->gate)) {
+ pr_err("%s: error initializing gate for %s\n", __func__, name);
+ return false;
+ }
+ if (!hyst_init(ccu, &peri->hyst)) {
+ pr_err("%s: error initializing hyst for %s\n", __func__, name);
+ return false;
+ }
+ if (!div_init(ccu, &peri->gate, &peri->div, &peri->trig)) {
+ pr_err("%s: error initializing divider for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ /*
+ * For the pre-divider and selector, the pre-trigger is used
+ * if it's present, otherwise we just use the regular trigger.
+ */
+ trig = trigger_exists(&peri->pre_trig) ? &peri->pre_trig
+ : &peri->trig;
+
+ if (!div_init(ccu, &peri->gate, &peri->pre_div, trig)) {
+ pr_err("%s: error initializing pre-divider for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ if (!sel_init(ccu, &peri->gate, &peri->sel, trig)) {
+ pr_err("%s: error initializing selector for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ return true;
+}
+
+static bool __kona_clk_init(struct kona_clk *bcm_clk)
+{
+ switch (bcm_clk->type) {
+ case bcm_clk_peri:
+ return __peri_clk_init(bcm_clk);
+ default:
+ BUG();
+ }
+ return -EINVAL;
+}
+
+/* Set a CCU and all its clocks into their desired initial state */
+bool __init kona_ccu_init(struct ccu_data *ccu)
+{
+ unsigned long flags;
+ unsigned int which;
+ struct clk **clks = ccu->clk_data.clks;
+ bool success = true;
+
+ flags = ccu_lock(ccu);
+ __ccu_write_enable(ccu);
+
+ for (which = 0; which < ccu->clk_data.clk_num; which++) {
+ struct kona_clk *bcm_clk;
+
+ if (!clks[which])
+ continue;
+ bcm_clk = to_kona_clk(__clk_get_hw(clks[which]));
+ success &= __kona_clk_init(bcm_clk);
+ }
+
+ __ccu_write_disable(ccu);
+ ccu_unlock(ccu, flags);
+ return success;
+}
+
/* Clock operations */

static int kona_peri_clk_enable(struct clk_hw *hw)
@@ -1192,90 +1279,3 @@ struct clk_ops kona_peri_clk_ops = {
.get_parent = kona_peri_clk_get_parent,
.set_rate = kona_peri_clk_set_rate,
};
-
-/* Put a peripheral clock into its initial state */
-static bool __peri_clk_init(struct kona_clk *bcm_clk)
-{
- struct ccu_data *ccu = bcm_clk->ccu;
- struct peri_clk_data *peri = bcm_clk->u.peri;
- const char *name = bcm_clk->init_data.name;
- struct bcm_clk_trig *trig;
-
- BUG_ON(bcm_clk->type != bcm_clk_peri);
-
- if (!policy_init(ccu, &peri->policy)) {
- pr_err("%s: error initializing policy for %s\n",
- __func__, name);
- return false;
- }
- if (!gate_init(ccu, &peri->gate)) {
- pr_err("%s: error initializing gate for %s\n", __func__, name);
- return false;
- }
- if (!hyst_init(ccu, &peri->hyst)) {
- pr_err("%s: error initializing hyst for %s\n", __func__, name);
- return false;
- }
- if (!div_init(ccu, &peri->gate, &peri->div, &peri->trig)) {
- pr_err("%s: error initializing divider for %s\n", __func__,
- name);
- return false;
- }
-
- /*
- * For the pre-divider and selector, the pre-trigger is used
- * if it's present, otherwise we just use the regular trigger.
- */
- trig = trigger_exists(&peri->pre_trig) ? &peri->pre_trig
- : &peri->trig;
-
- if (!div_init(ccu, &peri->gate, &peri->pre_div, trig)) {
- pr_err("%s: error initializing pre-divider for %s\n", __func__,
- name);
- return false;
- }
-
- if (!sel_init(ccu, &peri->gate, &peri->sel, trig)) {
- pr_err("%s: error initializing selector for %s\n", __func__,
- name);
- return false;
- }
-
- return true;
-}
-
-static bool __kona_clk_init(struct kona_clk *bcm_clk)
-{
- switch (bcm_clk->type) {
- case bcm_clk_peri:
- return __peri_clk_init(bcm_clk);
- default:
- BUG();
- }
- return -EINVAL;
-}
-
-/* Set a CCU and all its clocks into their desired initial state */
-bool __init kona_ccu_init(struct ccu_data *ccu)
-{
- unsigned long flags;
- unsigned int which;
- struct clk **clks = ccu->clk_data.clks;
- bool success = true;
-
- flags = ccu_lock(ccu);
- __ccu_write_enable(ccu);
-
- for (which = 0; which < ccu->clk_data.clk_num; which++) {
- struct kona_clk *bcm_clk;
-
- if (!clks[which])
- continue;
- bcm_clk = to_kona_clk(__clk_get_hw(clks[which]));
- success &= __kona_clk_init(bcm_clk);
- }
-
- __ccu_write_disable(ccu);
- ccu_unlock(ccu, flags);
- return success;
-}
--
1.9.1


\
 
 \ /
  Last update: 2014-06-16 16:41    [W:0.122 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site