[lkml]   [2014]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH V3 00/16] irqchip: crossbar: driver fixes
This series does some cleanups, fixes for handling two interrupts
getting mapped twice to same crossbar and provides support for
hardwired IRQ and crossbar definitions.

On certain platforms such as DRA7, SPIs 0, 1, 2, 3, 5, 6, 10,
131, 132, 133 are direct wired to hardware blocks bypassing
crossbar. This quirky implementation is *NOT* supposed to be the
expectation of crossbar hardware usage. This series adds support
to represent such hard-wired irqs through DT and avoid generic
allocation/programming of crossbar in the driver.

This way of supporting hard-wired irqs was a result of
the below discussions.

Based on 3.15 mainline.

All the patches are available here crossbar_updates

The fixes series[1] earlier posted is merged in to this.

[V2] Merged the above series and rebased on 3.15 mainline

[V3] Modified patch#3 to get irqs-skip properties from DT,
merged path#8 for checkpatch warning to other relevant
patches and fixed comments for other patches.

Nishanth Menon (14):
irqchip: crossbar: dont use '0' to mark reserved interrupts
irqchip: crossbar: check for premapped crossbar before allocating
irqchip: crossbar: introduce ti,irqs-skip to skip
irqchip: crossbar: initialise the crossbar with a safe value
irqchip: crossbar: change allocation logic by reversing search for
free irqs
irqchip: crossbar: remove IS_ERR_VALUE check
irqchip: crossbar: fix sparse and checkpatch warnings
irqchip: crossbar: fix kerneldoc warning
irqchip: crossbar: return proper error value
irqchip: crossbar: change the goto naming
irqchip: crossbar: introduce ti,max-crossbar-sources to identify
valid crossbar mapping
irqchip: crossbar: introduce centralized check for crossbar write
documentation: dt: omap: crossbar: add description for interrupt
irqchip: crossbar: allow for quirky hardware with direct hardwiring
of GIC

Sricharan R (2):
irqchip: crossbar: set cb pointer to null in case of error
irqchip: crossbar: add kerneldoc for crossbar_domain_unmap callback

.../devicetree/bindings/arm/omap/crossbar.txt | 34 ++++
drivers/irqchip/irq-crossbar.c | 168 +++++++++++++++++---
2 files changed, 177 insertions(+), 25 deletions(-)


 \ /
  Last update: 2014-06-16 14:01    [W:0.134 / U:1.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site