lkml.org 
[lkml]   [2014]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/3] mmc: sdhci: Use mmc core regulator infrastucture
Date
From: Tim Kryger <tim.kryger@gmail.com>

Switch the common SDHCI code over to use mmc_host's regulator pointers
and remove the ones in the sdhci_host structure. Additionally, use the
common mmc_regulator_get_supply function to get the regulators and set
the ocr_avail mask.

This change sets the ocr_avail directly based upon the voltage ranges
supported which ensures ocr_avail is set correctly while allowing the
use of regulators that can't provide exactly 1.8v, 3.0v, or 3.3v.

Signed-off-by: Tim Kryger <tim.kryger@gmail.com>
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <mporter@linaro.org>
---
drivers/mmc/host/sdhci.c | 97 ++++++++++++++++++-----------------------------
include/linux/mmc/sdhci.h | 3 --
2 files changed, 36 insertions(+), 64 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 47055f3..ee524b0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1223,6 +1223,7 @@ EXPORT_SYMBOL_GPL(sdhci_set_clock);
static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
unsigned short vdd)
{
+ struct mmc_host *mmc = host->mmc;
u8 pwr = 0;

if (mode != MMC_POWER_OFF) {
@@ -1284,9 +1285,9 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
mdelay(10);
}

- if (host->vmmc) {
+ if (!IS_ERR(mmc->supply.vmmc)) {
spin_unlock_irq(&host->lock);
- mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd);
+ mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd);
spin_lock_irq(&host->lock);
}
}
@@ -1440,13 +1441,15 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
{
unsigned long flags;
u8 ctrl;
+ struct mmc_host *mmc = host->mmc;

spin_lock_irqsave(&host->lock, flags);

if (host->flags & SDHCI_DEVICE_DEAD) {
spin_unlock_irqrestore(&host->lock, flags);
- if (host->vmmc && ios->power_mode == MMC_POWER_OFF)
- mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
+ if (!IS_ERR(mmc->supply.vmmc) &&
+ ios->power_mode == MMC_POWER_OFF)
+ mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
return;
}

@@ -1707,6 +1710,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
struct mmc_ios *ios)
{
+ struct mmc_host *mmc = host->mmc;
u16 ctrl;
int ret;

@@ -1725,8 +1729,9 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
ctrl &= ~SDHCI_CTRL_VDD_180;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);

- if (host->vqmmc) {
- ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000);
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
+ 3600000);
if (ret) {
pr_warning("%s: Switching to 3.3V signalling voltage "
" failed\n", mmc_hostname(host->mmc));
@@ -1746,8 +1751,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,

return -EAGAIN;
case MMC_SIGNAL_VOLTAGE_180:
- if (host->vqmmc) {
- ret = regulator_set_voltage(host->vqmmc,
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ ret = regulator_set_voltage(mmc->supply.vqmmc,
1700000, 1950000);
if (ret) {
pr_warning("%s: Switching to 1.8V signalling voltage "
@@ -1776,8 +1781,9 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,

return -EAGAIN;
case MMC_SIGNAL_VOLTAGE_120:
- if (host->vqmmc) {
- ret = regulator_set_voltage(host->vqmmc, 1100000, 1300000);
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
+ 1300000);
if (ret) {
pr_warning("%s: Switching to 1.2V signalling voltage "
" failed\n", mmc_hostname(host->mmc));
@@ -2962,25 +2968,22 @@ int sdhci_add_host(struct sdhci_host *host)
!(host->mmc->caps & MMC_CAP_NONREMOVABLE))
mmc->caps |= MMC_CAP_NEEDS_POLL;

+ /* If there are external regulators, get them */
+ if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
/* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
- host->vqmmc = regulator_get_optional(mmc_dev(mmc), "vqmmc");
- if (IS_ERR_OR_NULL(host->vqmmc)) {
- if (PTR_ERR(host->vqmmc) < 0) {
- pr_info("%s: no vqmmc regulator found\n",
- mmc_hostname(mmc));
- host->vqmmc = NULL;
- }
- } else {
- ret = regulator_enable(host->vqmmc);
- if (!regulator_is_supported_voltage(host->vqmmc, 1700000,
- 1950000))
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ ret = regulator_enable(mmc->supply.vqmmc);
+ if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000,
+ 1950000))
caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
SDHCI_SUPPORT_SDR50 |
SDHCI_SUPPORT_DDR50);
if (ret) {
pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
mmc_hostname(mmc), ret);
- host->vqmmc = NULL;
+ mmc->supply.vqmmc = NULL;
}
}

@@ -3041,34 +3044,6 @@ int sdhci_add_host(struct sdhci_host *host)

ocr_avail = 0;

- host->vmmc = regulator_get_optional(mmc_dev(mmc), "vmmc");
- if (IS_ERR_OR_NULL(host->vmmc)) {
- if (PTR_ERR(host->vmmc) < 0) {
- pr_info("%s: no vmmc regulator found\n",
- mmc_hostname(mmc));
- host->vmmc = NULL;
- }
- }
-
-#ifdef CONFIG_REGULATOR
- /*
- * Voltage range check makes sense only if regulator reports
- * any voltage value.
- */
- if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) {
- ret = regulator_is_supported_voltage(host->vmmc, 2700000,
- 3600000);
- if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
- caps[0] &= ~SDHCI_CAN_VDD_330;
- if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
- caps[0] &= ~SDHCI_CAN_VDD_300;
- ret = regulator_is_supported_voltage(host->vmmc, 1700000,
- 1950000);
- if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
- caps[0] &= ~SDHCI_CAN_VDD_180;
- }
-#endif /* CONFIG_REGULATOR */
-
/*
* According to SD Host Controller spec v3.00, if the Host System
* can afford more than 150mA, Host Driver should set XPC to 1. Also
@@ -3077,8 +3052,8 @@ int sdhci_add_host(struct sdhci_host *host)
* value.
*/
max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
- if (!max_current_caps && host->vmmc) {
- u32 curr = regulator_get_current_limit(host->vmmc);
+ if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) {
+ u32 curr = regulator_get_current_limit(mmc->supply.vmmc);
if (curr > 0) {

/* convert to SDHCI_MAX_CURRENT format */
@@ -3118,8 +3093,11 @@ int sdhci_add_host(struct sdhci_host *host)
SDHCI_MAX_CURRENT_MULTIPLIER;
}

+ if (mmc->ocr_avail)
+ ocr_avail &= mmc->ocr_avail;
+
if (host->ocr_mask)
- ocr_avail = host->ocr_mask;
+ ocr_avail &= host->ocr_mask;

mmc->ocr_avail = ocr_avail;
mmc->ocr_avail_sdio = ocr_avail;
@@ -3273,6 +3251,7 @@ EXPORT_SYMBOL_GPL(sdhci_add_host);

void sdhci_remove_host(struct sdhci_host *host, int dead)
{
+ struct mmc_host *mmc = host->mmc;
unsigned long flags;

if (dead) {
@@ -3310,15 +3289,11 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)

tasklet_kill(&host->finish_tasklet);

- if (host->vmmc) {
- regulator_disable(host->vmmc);
- regulator_put(host->vmmc);
- }
+ if (!IS_ERR(mmc->supply.vmmc))
+ regulator_disable(mmc->supply.vmmc);

- if (host->vqmmc) {
- regulator_disable(host->vqmmc);
- regulator_put(host->vqmmc);
- }
+ if (!IS_ERR(mmc->supply.vqmmc))
+ regulator_disable(mmc->supply.vqmmc);

if (host->adma_desc)
dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 08abe99..09ebe57 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -104,9 +104,6 @@ struct sdhci_host {

const struct sdhci_ops *ops; /* Low level hw interface */

- struct regulator *vmmc; /* Power regulator (vmmc) */
- struct regulator *vqmmc; /* Signaling regulator (vccq) */
-
/* Internal data */
struct mmc_host *mmc; /* MMC structure */
u64 dma_mask; /* custom DMA mask */
--
1.9.1


\
 
 \ /
  Last update: 2014-06-12 21:41    [W:0.043 / U:20.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site